Unitech PT-500 manual Diag COM, Diag MEM, Init Menu

3.DIAG COM

<DIAG MENU >

Connect Pin 2-3, 7-8

Ready? (Y/N)

Before diagnosing, loop back the RS232 port Pin 2-3, Pin 7-8, and press [ENTER]. The test result will be displayed on the bottom line.

4.DIAG MEM

<DIAG MENU >

Bank: 00

Offset: F800

During diagnosis, Memory Bank and Offset values will be displayed. If no problem is encountered, a “PASS” message will be displayed and you can exit to the previous menu. If a problem is found, a warning message will ask whether the test should be aborted. Press [YES] to exit. Press [NO] to continue.

6. INIT MENU

Select [6] to Initialize the PT-500 and return the terminal back to the Factory Default Setting.

<INIT MENU > Warning!!!

Data will be LOST

Continue? (Y/N)

25