Unitech RS700 user manual Connect Power

Page 13

Chapter 1 Getting Started

Connect Power

An internal backup battery helps prevent data loss when the RS700 disconnects from an external power source. The backup battery stores all data and system settings for up to seven days. Connect power to the RS700 through the following:

NOTE: To adequately charge the backup battery, connect the RS700 to an external power source and press the Backup Battery Switch. Charge the RS700 for at least 20 hours. The backup battery begins charging as soon as the RS700 connects to a power source.

1.Connect the Power/RS232 Cable to the PWR + RS232 Port, and rotate the cable cap clockwise to secure the connection.

2.Insert the AC Adapter into the power jack of the Power/RS232 Cable.

3.Insert the Power Cord into the AC Adapter.

4.Plug the other end of the Power Cord into an electrical outlet.

GP I/0

BACKUP

SW

DATA RFID PWR

PWR+RS232

X

Z	[
Y

NOTE: The PWR LED on the RS700’s front panel lights up green when the RS700 connects to a power source.

Once the RS700 connects to an external power source the device is ready for initial setup to make connections and read RFID tags.

5

Image 13

Contents RS700 Smart Rfid Fixed Reader Page About This Manual PrefaceFederal Communication Commission Interference Statement Regulatory Compliance StatementsFCC Caution FCC Radiation Exposure StatementBattery Charge Notice Battery NoticesStorage and Safety Notice Warranty Table of Contents Appendix a Getting Started FeaturesIntroducing the RS700 Package Contents Front Panel Tour of the RS700Component Description Bottom Panel Top PanelConnect Power Installing Wi-Fi Antenna Using the HardwareInstalling Rfid Antenna Optional Gpio Pin Assignment Using the Gpio InterfacePin Name Description Mounting the RS700 Performing a Hardware Reset Making Rfid Applications Using Smart-Reader ServerOpening Smart-Reader Server Installing the Srsrc Program Installing Microsoft .NET FrameworkControlling Smart-Reader Server Remotely Using the Smart-Reader Server Remote Control Configuring Antenna Port Defining Smart Reader Behavior Creating a New EC Spec Specifying Report Criteria Start //spec1starttrigger Stop //spec1stoptriggerUrnepcpatgid-96*.*.* to match any GID-96 tag Defining the EC SpecSubscribing the EC Spec Redefining the Subscription Viewing Data Collection Report Connecting to BizTalk Server Using the Application Programming InterfaceViewing Server Log Making Rfid Applications Making Rfid Applications Check Add single device. Click Next Input the RS700s IP address and port number. Click Next Making Rfid Applications Making Rfid Applications Making Rfid Applications Click MyEdgeServer Click Change dispatcher Connecting to Oracle Sensor Edge ServerMaking Rfid Applications Click Add new device Select Smart Reader Device Click MyEdgeServer → Groups → Default → RS700 Click Start all devices Connecting to a LAN Network Advanced SettingsObtaining an IP Address Setting the System Time Advanced SettingsSetting up Ethernet connection Connecting to a Wlan Network Advanced Settings Advanced Settings Managing your Wireless Profiles Advanced Settings Advanced Settings Establishing Terminal-PC Connection Installing Microsoft ActiveSyncAdditional Capabilities Connecting the terminal to Your Computer On the computer, click My Computer → Mobile Device folder Using Microsoft ActiveSync to Exchange FilesClick Start → Programs → ActiveSync Remote Display Using Remote ControlProblem Solution TroubleshootingAppendix a System SpecificationRegion Web site Support