MAINTENANCE
8- Reinstall the Index Ramp in the proper orientation for your mounting configuration as shown in Figures 64 & 65.
RIGHT HAND CONFIGURATION
FIGURE 64
LEFT HAND CONFIGURATION
FIGURE 65
REPLACING PRINT DRUM INDEX SPRINGS
1- To replace Print Drum Index Springs, rotate the Print Drum approximately 3/4 turn to relieve spring tension as shown in Figure 59, Page 32.
2- Using a small screwdriver, remove the two Snap Rings on the Index Spring Assembly.
FIGURE 66
3- Remove the Index Spring Assembly by lifting it straight up off the pivot pins.
FIGURE 67
34