Vivotek VS2403 manual

“Digital input state”:		H (high), L (low), / (low to high), \ (high to low)
“M”:		motion detection event.
“Channel Number”:		A, B, C, D for channel 1, 2, 3, 4
“Video input state”:		/ (signal from loss to presence), \ (signal from presence to
		loss), X (as long as signal loss)
“Delay time”:		seconds of delay for the following actions after events happen
“Digital output number”:		1 ~ 2
“Digital output state”:		C (NC), O (NO)
“V”:		set video channel to go to preset location
“P”:		set preset location number to go to preset location
“W”:		send warning to server
“IP”:		server IP
“Port”:		server port
“Message”:		texts to be sent to the server
“U”:		upload snapshots
“Method”:		‘F’ is by FTP, ‘M’ is by e-mail
“S”:		take snapshot on channels
“N”:		define the format of the filename
“;”:		end of line
The filename format is,
%c	channel number
%a	image characterization (pre, trg, pos)
%y	year
%M	month
%d	day
%h	hour
%m	minute
%s	second

- 46 -

www.vivotek.com