Vivotek VS2403 manual Set server parameter values, Nosync

HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: 33\r\n \r\n network.ipaddress=192.168.0.123\r\n

Set server parameter values

Note: This request require administrator access

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/admin/setparam.cgi? [nosync=<value>&]<parameter>=<value> [&<parameter>=<value>…][&return=<return page>]

parameter	value	description
nosync	0, 1	Specifies that there should be no sync (write) of
		the corresponding configuration file on flash. If
		parameter is omitted, a sync write will occur.
		(note: this parameter must be put at begin of
		parameter list)
<group>_<name>.	value to assigned	Assign	<value>	to	the	parameter
		<group>_<name>..
return	<return page>	Redirect to the page <return page> after the
		parameter is assigned. The <return page> can be
		a full URL path or relative path according the the
		current path. If you omit this parameter, it will
		redirect to an empty page.
		(note: The return page can be a general HTML
		file(.htm, .html) or a Vivotek server script
		executable (.vspx) file. It can not be a CGI
		command. It can not have any extra parameters.
		This parameter must be put at end of parameter
		list)
Return:
		- 65 -
						www.vivotek.com