Vivotek VS2403 manual Definitions of Configuration, System parameters, Change host name

Page 25

Definitions of Configuration

System parameters

Change host name

The “Host name” is used for the homepage title of main page and displays as the title over the video window on the main page. The maximum string length is 40 characters or 20 characters in double-byte-character-systems like Chinese or Japanese.

Adjust date and time

There are three ways to adjust system date and time. The easiest is to make Video Server "Sync with computer time". The second “Manual” is to set the date and time manually by entering new values. Notice the format in the related field while typing. The third “Automatic” is to make Video Server automatically synchronize with timeservers over the Internet every month. It may fail if the assigned NTP server cannot be reached or Video Server is within a local network. Leaving the NTP server blank will let Video Server connect to default time servers. Domain name or IP address format is acceptable as long as DNS server is available. Do not forget setting the "Time zone" offset for local settings. Refer to the Appendix G for the time zone of your region. It only affects the hour in NTP method.

Once the settings are changed, click on “Save” to validate changes.

- 24 -

www.vivotek.com

Image 25
Contents Page Technical@vivotek.com Before You Use Table of Contents Frequently Asked Questions Package Contents Features and Benefits Remote system upgrade Bundled powerful surveillance softwarePrivacy mask Built-in motion detectionFront Panel Physical DescriptionStatus LED’s Auxiliary button Reset DIP switches 1 toBNC video inputs LED status DescriptionEthernet 10/100 socket Rear PanelCOM port General I/O terminal blockRS485 interface Power sourceDigital I/O control Power adapter How to Install Power on Hardware installationEthernet Environment Cable connectionEasy way with installer program Software installationPage First access to Video Server How to UseSet password of administrator Complete the network settingsAuthentication Installing Plug-in Text mode Graphic modeMain Video input selection System configurationVideo quality selection Video size selectionMotorized camera control Custom camera commandsIntroduction System ConfigurationAdjust date and time Definitions of ConfigurationSystem parameters Change host nameSecurity privilege Basic network settings Network settingsFix the IP address PPPoEPage Ddns & UPnP Enable DdnsFTP settings Mail settingsMail & FTP Allow list Access listDeny list Adjust image settings Enable video channelsConfigure attached motorized camera Video, camera mapping and motion detectionConfigure privacy mask Configure motion detectionSelect default video source Set video modulationPage Custom commands Port settingsCamera Control Choose serial interfaceText mode Image modeHomepage layout Application constitution External command scriptWeekly schedule Event operationSending method Sequential operationView log file Factory defaultView parameters Capture Up-to-date Still Images Advanced FunctionsGet snapshot via URL Get snapshot via FTPSelect video source and quality and size Get Continuous ImagesDisplay all video Get triggered snapshots via URL Download Event-triggered SnapshotsGet triggered snapshots via FTP Channel name Folder nameFile name Value Description Upload snapshots to external FTP server Uploading Snapshots PeriodicallySend snapshots to external Smtp email server Object File name Customize Graphics in HomepageCommand format Command Script for Complex ApplicationsParameter explanation Page Practical examples Command line DescriptionQuery status of digital inputs URL for External Device ControlDrive digital outputs Move motorized camera in PTZ directionSend command to device attached to COM2 Send command to device attached to COM1Transparent Remote Serial Driver Restore Factory Default Settings via URL URL of System MaintenanceDownload System Log via FTP Restart System via URLConfigure System via FTP Viewmode Security Usercount Username 0root Userattr 0video1video2video3video4camctrldidoconf System core debugging Telnet CommandsMonitor changed status of digital inputs Stop information dumpingReset system Restore factory default settingsPower-On-Self-Test TroubleshootingLED pattern after Post Failed function Troubleshooting AppendixReset System recoveryFrequently Asked Questions Page Page Easy way via Installation Wizard Upgrade System FirmwareURL URL Commands of Video ServerHomepage name Referenced URL Resource name Referenced URL System resource URLGet server parameter values General CGI URL syntax and parametersMethod GET/POST Nosync Set server parameter valuesAvailable parameters on the server WirelessVideo Serverwith Pan/Tilt/ZoomYyyy/mm/dd HhmmssSkip to invoke default server 192.168.0.99 Group Security255.255.255.0 LAN Usernameemail Address Group IPFilter255.255.255.255 Ntsc PAL For Ntsc onlyNtsc & Cmos Group Motion1~4Group CAMCTRL1~4 Script.vssx Group Feature Camera model Baud rate Data bits Stop bit Parity bit Settings of Supported PTZ CamerasCamera Control Cable Time Zone Table Page GMT+1000 Hobart Vladivostok GMT+1100 Networking Technical SpecificationsElectromagnetic Compatibility EMC