Vivotek VS2403 manual BNC video inputs, DIP switches 1 to, Auxiliary button Reset

Page 10

Item	LED status	Description

Power-On-Self-Test	LED1 and LED2 blink alternately by 150ms	During the test

	LED1 blinks one time and LED2 blinks 3 times	TM1302 test fail

	LED1 blinks one time and LED2 blinks 4 times	RTL8100BL test
		fail

Network	LED1 off, LED2 off	Network fail

	LED1 blink every 0.5 second, LED2 off	Network normal,
		Heartbeat

Camera control	LED2 blink every 1 second	Get the control
		message

BNC video inputs

Video Server allows up to four cameras attached at the same time. To ensure video modulation type being detected correctly, cameras should be attached sequentially from “VIDEO1” to “VIDEO4” and powered on before Video Server is powered on.

DIP switches “1” to “4”

There are four DIP switches numbered from “1” to “4” in the front panel regarding of each video input. They are used to enable the 75-ohm resistance of video impedance. They should be kept ON if the video input is terminated in the Video Server or left in high impedance for looping.

Auxiliary button “RESET”

There is a button located at the left of “VIDEO4” in the front panel. Refer to the Appendix Troubleshooting for the detailed usage of system recovery.

- 9 -

www.vivotek.com

Image 10

Contents Page Technical@vivotek.com Before You Use Table of Contents Frequently Asked Questions Package Contents Features and Benefits Privacy mask Bundled powerful surveillance softwareRemote system upgrade Built-in motion detectionFront Panel Physical DescriptionStatus LED’s BNC video inputs DIP switches 1 toAuxiliary button Reset LED status DescriptionCOM port Rear PanelEthernet 10/100 socket General I/O terminal blockRS485 interface Power sourceDigital I/O control Power adapter How to Install Ethernet Environment Hardware installationPower on Cable connectionSoftware installation Easy way with installer programPage Set password of administrator How to UseFirst access to Video Server Complete the network settingsAuthentication Installing Plug-in Text mode Graphic modeMain Video quality selection System configurationVideo input selection Video size selectionCustom camera commands Motorized camera controlSystem Configuration IntroductionSystem parameters Definitions of ConfigurationAdjust date and time Change host nameSecurity privilege Fix the IP address Network settingsBasic network settings PPPoEPage Enable Ddns Ddns & UPnPFTP settings Mail settingsMail & FTP Allow list Access listDeny list Configure attached motorized camera Enable video channelsAdjust image settings Video, camera mapping and motion detectionSelect default video source Configure motion detectionConfigure privacy mask Set video modulationPage Camera Control Port settingsCustom commands Choose serial interfaceText mode Image modeHomepage layout Weekly schedule External command scriptApplication constitution Event operationSequential operation Sending methodView log file Factory defaultView parameters Get snapshot via URL Advanced FunctionsCapture Up-to-date Still Images Get snapshot via FTPSelect video source and quality and size Get Continuous ImagesDisplay all video Get triggered snapshots via FTP Download Event-triggered SnapshotsGet triggered snapshots via URL Channel name Folder nameFile name Value Description Upload snapshots to external FTP server Uploading Snapshots PeriodicallySend snapshots to external Smtp email server Customize Graphics in Homepage Object File nameCommand format Command Script for Complex ApplicationsParameter explanation Page Command line Description Practical examplesDrive digital outputs URL for External Device ControlQuery status of digital inputs Move motorized camera in PTZ directionSend command to device attached to COM2 Send command to device attached to COM1Transparent Remote Serial Driver Download System Log via FTP URL of System MaintenanceRestore Factory Default Settings via URL Restart System via URLConfigure System via FTP Viewmode Security Usercount Username 0root Userattr 0video1video2video3video4camctrldidoconf Monitor changed status of digital inputs Telnet CommandsSystem core debugging Stop information dumpingRestore factory default settings Reset systemLED pattern after Post Failed function Troubleshooting TroubleshootingPower-On-Self-Test AppendixSystem recovery ResetFrequently Asked Questions Page Page Upgrade System Firmware Easy way via Installation WizardURL URL Commands of Video ServerHomepage name Referenced URL System resource URL Resource name Referenced URLGet server parameter values General CGI URL syntax and parametersMethod GET/POST Set server parameter values NosyncYyyy/mm/dd WirelessVideo Serverwith Pan/Tilt/ZoomAvailable parameters on the server HhmmssSkip to invoke default server 192.168.0.99 Group Security255.255.255.0 LAN Usernameemail Address Group IPFilter255.255.255.255 For Ntsc only Ntsc PALGroup Motion1~4 Ntsc & CmosGroup CAMCTRL1~4 Script.vssx Group Feature Settings of Supported PTZ Cameras Camera model Baud rate Data bits Stop bit Parity bitCamera Control Cable Time Zone Table Page GMT+1000 Hobart Vladivostok GMT+1100 Technical Specifications NetworkingElectromagnetic Compatibility EMC