Worth Data 802 RF user manual LCD Backlight Display Mode, Backlight Duration, Skip Opening Screens

•If you set this feature to 1 (YES), in order for the RF Terminal to transmit the following values, the corresponding Control Key must be the first key pressed in a data entry sequence. If it is not the first data entered, the arrow key is ignored.

Control Key on RF Terminal	Code transmitted to Host
Up Arrow	FS (ASCII 28)
Down Arrow	GS (ASCII 29)
Left Arrow	RS (ASCII 30)
Right Arrow	US (ASCII 31)
Begin	ETB (ASCII 23)
End	CAN (ASCII 24)
Search	VT (ASCII 11)

LCD Backlight Display Mode

Other

No	0
Yes	1

The Backlit Display is standard. The default setting is for the LCD Backlight to be ON. As shipped the Backlight Duration is 5 seconds.

Backlight Duration

Other

Always ON	0
Duration in # of seconds	1..2..5..-9

The Backlight Duration is of no concern unless you have set the LCD Backlight Display to 1 for YES. This setting determines how long the

Backlight Display is on at startup or when triggered by pressing the F2 key. Always ON will create a drain on your batteries and you can expect shorter

battery life. The default setting is 5 seconds.

Skip Opening Screens

RF Setup

No	0
Go to Device SIGN ON	1

•Many users want to skip the opening screens and go directly to SIGN

ON communication once their programs are fully operational. Selecting 1 will automatically take the operator to the DEVICE SIGN ON and into your application program, skipping the screen shown below:

DEVICE SIGN ON	------>1
SETUP MODE------------	>2
SITE SURVEY------------	>3

2-7