Worth Data 802 RF user manual 5000-65536, True, False, Any valid file path and name, Through 2GB

	Keep in mind that unless your terminal is configured
	with a static IP address, each time it is powered on it
	can have a different IP address (issued by your DHCP
	server). Also, regardless of the terminal’s IP address, it
	can be assigned a different ID (by WD802Term) each
	time it Signs On to the server. Keep this in mind and
	design your application accordingly if you require
	specific physical terminals to perform specific
	individual tasks.
ServerPort
Valid values:	5000-65536
Function:	These are the IP ports used by WD802Term to pass
	command information to and from each terminal. This
	setting must match the PORT setting in all terminals
	used with this host application. Do not use port values
	less that 5000. If you are not familiar with IP ports,
	leave this value at the default setting.
ServerActive
Valid values:	True, False
Function:	Set ServerActive to True to begin listening for
	terminals. Before setting to True, be sure to call the
	InitializeServer method (See Methods)
LogFileName
Valid values:	Any valid file path and name
Function:	Leave blank if you do not want a log file kept. If you
	enter a filename here, WD802Term will create the file
	(or add to it if it already exists) in standard text file
	format that you can open using Windows Notepad.
LogFileSize
Valid values:	1000 through 2GB (2000000000)
Function:	This is the maximum log file size that WD802Term
	will keep. If the file exceeds this size, the oldest
	entries are removed to make room for new entries.
Quiet
Valid values:	True, False
Function:	If Quiet is set to True then any status and error
	message generated by WD802term will be
	suppressed.

6-8