Worth Data 802 RF user manual Set Date, Set Time, Display of Year

with the RF Terminal, this will be set to Rechargeable before shipping.

•If you didn't order re-chargeable batteries, this shipped setting is Alkaline. Battery Status can be displayed by pressing the STATUS key on the RF Terminal keypad.

•Before you can recharge the batteries, this parameter must be set to Rechargeables. Don't try to recharge alkaline batteries. They might explode. This will void your warranty.

•If you decide to use rechargeables after ordering the RF Terminal without rechargeables included, you must change this setting allow recharging.

Date Format	Date/
	Time
US Format	0
European Format	1

•The US format of mm/dd/yy is the default setting.

•If you switch formats, you must reset the date (SET DATE) in the new format also.

Set Date

Date/ Time

For correct date display, the 6-digit date must be set in the date format you

plan to use. By default the US terminals use the US date format of dd/mm/yy. If you change the date format, you must re-set the date to match

the new format. For example, to set a date of January 20, 1999, you would enter 012099 (US format) or 200199 (European format). The date can be scanned in from the bar coded Setup Menu or entered from the RF Terminal keypad. To display the date during operation, press the STATUS key.

Set Time

Date/ Time

The time is set using a 4-digit military hhmm format. For example, to set the time to 3:08 p.m., you would enter 1508. The time can be scanned in

from the bar coded Setup Menu or entered from the RF Terminal keypad. To display the time during operation, press the STATUS key.

Display of Year

Date/ Time

2 digit	0
4 digit	1

•By default, the RF Terminal is configured to display and transmit the year in a 2-digit format; i.e. 2005 would transmit and display as 05.

•Before you change the RF Terminal to display a 4-digit year, i.e. 2005, make sure that the software receiving data from the RF Terminal is set up to accept a 4-digit year.

2-15