Z Microsystems 15 manual Setting UP Monitor Keyboard and Mouse

Install Console

SETTING UP MONITOR KEYBOARD AND MOUSE

With both hands, press	Slide the Console all	Using both hands,
both the Z-Locks down	the way out.	gently lift the Console
and		screen by the top bar.

Open the storage tray top.

Remove the keyboard and mouse.

The storage tray door now becomes a workstation for the keyboard and mouse.

There should be ample cable to both units for movement around the workstation.

Align the Keyboard and Mouse cable to pass through the recessed access notch.

Close the storage tray top, then place the keyboard and mouse on top of the tray door.

11

Doc# 27-0002UM Issued 7/99 Rev. 1.2