Z Microsystems 15 manual Regulatory, FCC Information

Regulatory

FCC INFORMATION

1. Use the power
and video
cables supplied
with the
Command
Console to help
prevent
interference
with radio and
television
reception. The
use of cables
and adapters	COMMAND
may cause
interference	CO NSO L E
with electronic
equipment in		15
the vicinity of
this unit.
2. This equipment
is pending
approval for a		accordance with the
Class A digital device,
		instructions, may cause
pursuant to certain limits
		harmful interference to radio
imposed by Part 15 of the
		communications. However
FCC rules. These limits are
		there is no guarantee that
designed to provide
		interference will not occur in
reasonable protection
		a particular installation. If
against harmful interference
		this equipment does cause
in a residential installation.
		harmful interference, to
This equipment generates,
		radio or television reception,
uses and can radiate radio
		which can be determined by
frequency energy, and, if not
		turning the equipment off
installed and used in

2

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult your dealer or an experienced radio/TV technician for help.

3.If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet, prepared to be the FCC, helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, DC, 20402, Stock No. 004- 00345-4.

Doc# 27-0002UM Issued 7/99 Rev. 1.2