Display Modes
The display mode the monitor uses is controlled by the computer. Refer to the computer documentation for details on how to change display modes.
The image size, position and shape may change when the display mode changes. This is normal and the image can be readjusted using AUTO SETUP and the monitor controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, TFT technology is inherently flicker- free. If possible, configure the computer for 1024 x 768 addressablility at 60 Hz vertical refresh rate.
For the Factor Set Display Modes listed below, the screen image has been optimized during manufacture.
FACTORY SET DISPLAY MODES
26
Doc#