Install Console
INSTALL THE COMMAND CONSOLE IN THE SLIDES
Pull the two Console | Hold the Console by |
slides out until they lock. | each side, with the front |
| toward you. |
| Feed the four cables |
| coming out of the |
| Console back through |
| the cabinet frame. |
| Guide the Console into |
| the slides and slide the |
| Console in until it stops. |
Simultaneously press in the catches on each slide and slide the Console all the way into the cabinet frame.
The Console should slide in and out easily.
TEST INSTALLATION AND MAKE ADJUSTMENTS
Slide the Console in and out several times.
The Console should easily close completely.
Because of variances in cabinet frames, there may need to be some adjustments of the Console slide system for best fit and movement of the Console in and out.
To be sure the slide and mount assembly are aligned properly, slide the Console in and out several times.
If the Console binds during sliding, do the following:
9
Doc#