Using the Software
DVD-RAM Driver
After installing
For more information, refer to the online manual of 
page 13).
Installing DVD-RAM Driver
1Set “DVD Drive Utility Disc” in the drive.
Windows XP
E [Utility Setup tool] screen will appear (allow some time for disc recognition).
When the setup program will not run automatically, input [x:\setuputil.exe]*1 in [start] - [Run] and select [OK].
Windows 2000
At the message, select [OK]. [Utility Setup tool] screen will appear (allow some time for disc recognition).
When the setup program will not run automatically, input [x:\setuputil.exe]*1 in [Start] - [Run] and select [OK]. At the message, select [OK].
*1 “x” is the drive letter. You can change the letter to suit your preference.
2Select
3Select [Driver and Formatter Setup].
4At the welcome screen, select [Next].
5The License Agreement screen appears. Carefully read the agreement, then select [Yes].
6At [Choose Destination Location] screen, do not change the setting, and select [Next].
7At [Select Program Folder] screen, do not change the setting, and select [Next].
8At [Start Copying Files] screen, select [Next].
9After installation, execute the following operations.
Windows XP
Select [Yes, I want to restart my computer now], then select [Finish]. The computer will restart automatically.
Windows 2000
Select [Finish]. (Then detecting
When [System Settings Changes] screen is displayed, select [Yes]. (If two [System Settings Changes] screens are displayed, select [Yes] on one of them.)
The computer will restart automatically.
12