Panasonic KX-HGW200 IP Address Home side ³IP Address, IP Masquerade ³IP Masquerade, Range, Idle

ÒSetting Up the Parameters

Instructions for the data fields

IP Address (Home side)

	³IP Address	Enter the local IP address of the KX-HGW200 in this data field.
		The default parameter is “192.168.0.254”.
		If you change this IP address, change the gateway address in
		each computer (p. 53 or 55) and change the proxy server setting
		of the web browser (p. 47 or 49) in each computer if necessary.
		The IP address must be set out of the Available Address Range.
	³Netmask	Enter the netmask of the local IP address of the KX-HGW200 in
		this data field. The default parameter is “255.255.255.0”.
IP Masquerade

³IP Masquerade

This function translates local addresses on the home network into one IP address. The default setting of the KX-HGW200 is “Use”.

DHCP Server

³DHCP Server	This function enables the KX-HGW200 to assign a local IP
	address automatically to a device in the home network. The
	default setting of the KX-HGW200 is “Use”. To set up the
	KX-HGW200 for a static IP network, click “Do Not Use” check box.
	If you change the DHCP server setting, set the IP address in the
	each computer. (See p. 52 or 55.)
³Available Address	When the DHCP server function of the KX-HGW200 is used, enter
Range	the extent of the assigned local IP addresses in this data field, up
	to 32 addresses.

PPPoE Connection

When a PPPoE connection is used to connect to the ISP, you can select how to initiate/stop the PPPoE connection. First, select how to connect from the Connect. If your payment plan with your ISP does not include unlimited Internet access and you are charged, instead, according to your usage, it is recommended that you select “Automatic” or “Manual”.

³Always connected	The PPPoE connection is online as long as the KX-HGW200 is
	turned on. This is the default setting.
³Automatic	The PPPoE connection is online only when data is being sent to
	the Internet from a computer in the home network. This function
	allows you to initiate/stop the PPPoE connection on the PPPoE
	connection screen, as the Manual setting does. For more details,
	see p. 41.
³Manual	The PPPoE connection is online only when you click [Connect]
	on the PPPoE connection screen. To stop the PPPoE connection,
	click [Disconnect] on the PPPoE connection screen. For more
	details, see p. 41.
Disconnection on	If enabled, the KX-HGW200 detects when the PPPoE connection
Idle	is idle and will automatically disconnect it when the length of idle
	time exceeds the user-specified limit.
	When you use this function, check “Enabled” and specify the time
	(1–99 minute).
	When “Always connected” is selected, the timer does not work.

34