Panasonic KX-HGW200 manual Turning on the Devices

Page 19

Turning on the Devices

After all connections have been made, all the devices should be turned on following the steps below.

Make sure all the devices in your home network including the modem and the Ethernet Hub are turned off.

1 Turn on the cable/xDSL modem.

³After turning it on, leaving the modem idle for few minutes is recommended.

2 Connect the DC plug of the AC adaptor to the DC IN jack of

the KX-HGW200 and connect the AC plug of the AC adaptor to the power outlet.

Installation

DC IN jack

DC plug

Power Outlet

(AC120 V, 60 Hz)

AC plug

Secure the DC plug using the hook.

AC adaptor (included accessory)

DC plug

3

4

³USE ONLY WITH Panasonic AC ADAPTOR (Order No. PQLV12). ³The AC adaptor must remain connected at all times.

(It is normal for the adaptor to feel warm during use.)

If you use an Ethernet Hub, turn it on.

Turn on the computers in the home network.

³After turning on all the devices, see p. 11 and make sure that the appropriate indicator lights are on.

For assistance, please call: 1-800-272-7033

19

Image 19

Contents Operating Instructions Attach your purchase receipt here For your future reference Before Initial UsePage Table of Contents Important Safety Instructions Web Browser Setting for Proxy Server UseSetting the Static Network Parameters TroubleshootingOverview FeaturesNetworking Security Easy to AdministerInternet Sharing Dhcp Dynamic Host Conﬁguration Protocol Server and ClientWindows Macintosh System RequirementsFor extra orders, call Included AccessoriesFront View Part NamesRear View Shape of RJ-45 and RJ-11 plug IndicatorsLight Color Indicates Diagram of Connections SetupHow the KX-HGW200 Works Your current setupBefore installing the KX-HGW200 After installing the KX-HGW200Preparation Connecting the KX-HGW200 to a Cable/xDSL ModemTo connect computers using the HomePNA Connecting the KX-HGW200 to a Home NetworkTo connect computers using optional wireless cards To connect a computer directly to the KX-HGW200 Setup Turning on the Devices Conﬁguring the Computer Setup of a Microsoft Windows ComputerPlease make note for future reference Conﬁguring the Computer Installed gateways data setting ﬁeldSelect Disable DNS Page Setup of a Macintosh Computer Information Conﬁgure pop-up menuFor Windows For Macintosh If the dialog box does not appear Conﬁrmation of the SetupConﬁrmation of the Home Network Setup When you use the proxy server settingIf the above screen does not appear Conﬁrmation of the SetupIf a web site does not appear Internet Conﬁguration and ConﬁrmationInternet Conﬁguration ConﬁrmationConﬁguration System CommandsInformation Basic Setup Setting Up the ParametersSee the next page for instructions about each data ﬁeld Instructions for the data ﬁelds See p and 35 for instructions about each ﬁeld Additional Setup³Available Address IP Address Home side ³IP AddressIP Masquerade ³IP Masquerade Dhcp Server ³DHCP Server³Forwarding Port Port Forwarding³Entry ³ProtocolPing Using the FunctionsRestart Clear SettingChange Password For Windows For Macintosh Firmware UpgradeError messages When the PPPoE connection is not being made When the PPPoE connection is being madePPPoE Connection Usage Data StatusUser Registration Support Help To Initialize the KX-HGW200 Restarting the KX-HGW200To Restart the KX-HGW200 From the Tools menu, select Internet Options For WindowsIf the check box is checked, click Advanced Web Browser Setting for Proxy Server UseFor Macintosh Web Browser Setting for Proxy Server Use Dynamic IP Network Dhcp server function active Setting the Static Network ParametersStatic IP Network Dhcp server function inactive Select Specify an IP address Setup of a Windows ComputerWindow below appears Page Setup of a Macintosh Computer Click the close button Wall Mounting Wall Template Problem Cause and Remedy TroubleshootingProblem TroubleshootingLED Display WeightPower SpeciﬁcationsImportant Safety Instructions Ringer Equivalence No. REN FCC and Other InformationFCC and Other Information For using the optional wireless cardAddress ﬁeld URL line IndexIndex Web Browser When you ship the product For product service