Panasonic KX-HGW200 manual Instructions for the data fields

Page 32

ÒSetting Up the Parameters

Instructions for the data fields

Unless the ISP requires you to enter the parameters, leave these data fields blank.

Internet Connection

Depending on the ISP, your Internet connection will be one of several types. Check the information provided by the ISP and make sure which type of connection is required. Then, select the appropriate connection type from DHCP, PPPoE or Static on the KX-HGW200 web screen and enter the parameters if required by the ISP.

DHCP

When the ISP uses the DHCP server function, basically no

³Device Name

settings of the parameters are needed except for the entry of the

 

Device Name. Select the DHCP radio button according to the

 

check mark in the ✎Memo1 (See p. 21, 25 or Quick Prep

 

Sheet). Or, check the information provided from the ISP and

 

enter the ISP specified Device Name in the data field if required.

 

If not required, leave the data field blank.

 

 

 

PPPoE*

When the ISP requires you to use the PPPoE connection, entry

 

of these data fields is needed.

 

³User Name/

Enter ISP specified User Name and Password. Connection to the

Password

ISP is made using this User Name and Password.

 

³Service Name

Enter ISP specified Service Name if required. When a Service

 

Name is not specified by the ISP, leave this data field blank.

³Access

Enter ISP specified Access Concentrator Name (sometimes

Concentrator Name

specified as “AC Name”) if required. When the name is not

 

specified by the ISP, leave this data field blank.

 

 

 

Static

When the ISP requires you to use the static IP connection, enter

³IP Address

the ISP specified IP Address and Netmask (Subnet mask) in

³Netmask

✎

2

each data field. Set the parameters recorded in the

Memo

 

and ✎Memo3 (See p. 21, 25 or Quick Prep Sheet).

 

 

 

 

*The parameters for the PPPoE connection have not been collected in the ✎Memo sections of the previous pages or Quick Prep Sheet. To set these parameters to the KX-HGW200, refer to the information from your carrier or ISP.

Default Gateway

³Gateway

When the ISP requires it, enter the gateway IP Address in this

 

data field. Set the parameter recorded in the✎Memo4 (See

 

p. 22, 25 or Quick Prep Sheet).

 

 

DNS

 

³DNS Server 1/

DNS Server 2

³Domain Name

When the ISP requires them, enter the domain name server IP Addresses in these data fields. When the DNS server 2 data field is not specified, leave this data field blank.

When the ISP requires it, enter the domain name in this data field. Set the parameters recorded in the ✎Memo5 (See p. 23, 25 or Quick Prep Sheet).

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Operating Instructions Before Initial Use Attach your purchase receipt here For your future referencePage Table of Contents Web Browser Setting for Proxy Server Use Setting the Static Network ParametersTroubleshooting Important Safety InstructionsNetworking FeaturesOverview Easy to Administer Internet SharingDhcp Dynamic Host Configuration Protocol Server and Client SecuritySystem Requirements Windows MacintoshIncluded Accessories For extra orders, callRear View Part NamesFront View Light Color Indicates IndicatorsShape of RJ-45 and RJ-11 plug Setup Diagram of ConnectionsYour current setup Before installing the KX-HGW200After installing the KX-HGW200 How the KX-HGW200 WorksConnecting the KX-HGW200 to a Cable/xDSL Modem PreparationConnecting the KX-HGW200 to a Home Network To connect computers using the HomePNATo connect computers using optional wireless cards To connect a computer directly to the KX-HGW200 Setup Turning on the Devices Setup of a Microsoft Windows Computer Configuring the ComputerPlease make note for future reference Installed gateways data setting field Configuring the ComputerSelect Disable DNS Page Setup of a Macintosh Computer Configure pop-up menu InformationConfirmation of the Setup Confirmation of the Home Network SetupWhen you use the proxy server setting For Windows For Macintosh If the dialog box does not appearConfirmation of the Setup If the above screen does not appearInternet Configuration and Confirmation Internet ConfigurationConfirmation If a web site does not appearInformation System CommandsConfiguration See the next page for instructions about each data field Setting Up the ParametersBasic Setup Instructions for the data fields Additional Setup See p and 35 for instructions about each fieldIP Address Home side ³IP Address IP Masquerade ³IP MasqueradeDhcp Server ³DHCP Server ³Available AddressPort Forwarding ³Entry³Protocol ³Forwarding PortUsing the Functions PingClear Setting RestartChange Password Firmware Upgrade For Windows For MacintoshError messages PPPoE Connection When the PPPoE connection is being madeWhen the PPPoE connection is not being made Status Usage DataUser Registration Support Help To Restart the KX-HGW200 Restarting the KX-HGW200To Initialize the KX-HGW200 For Windows From the Tools menu, select Internet OptionsWeb Browser Setting for Proxy Server Use If the check box is checked, click AdvancedFor Macintosh Web Browser Setting for Proxy Server Use Static IP Network Dhcp server function inactive Setting the Static Network ParametersDynamic IP Network Dhcp server function active Setup of a Windows Computer Select Specify an IP addressWindow below appears Page Setup of a Macintosh Computer Click the close button Wall Mounting Wall Template Troubleshooting Problem Cause and RemedyTroubleshooting ProblemWeight PowerSpecifications LED DisplayImportant Safety Instructions FCC and Other Information Ringer Equivalence No. RENFor using the optional wireless card FCC and Other InformationIndex Address field URL lineIndex Web Browser For product service When you ship the product
Top Page Image Contents