Panasonic KX-HGW200 manual Window below appears

Page 53

Ò

7 Enter a local IP address for the the computer (i.e, 192.168.0.50) and the Subnet mask in the appropriate data ﬁeld.

³The subnet mask is normally entered as “255.255.255.0”. If you intend to access the web screen of the KX-HGW200, you should make this parameter the same as that of the KX-HGW200 home side netmask.

8 Click the Gateway tab.

The window below appears.

9 Enter “192.168.0.254” (default local IP address of the KX-HGW200) into the New gateway address ﬁeld and click [Add].

10 Make sure “192.168.0.254” is entered into theInstalled gateways address ﬁeld and click[OK].

³When you change the local IP address of the KX-HGW200, change the address in the Installed gateways address ﬁeld.

	(Continued Ò)
For assistance, please call: 1-800-272-7033	53

Useful Information

Image 53

Contents Operating Instructions Attach your purchase receipt here For your future reference Before Initial UsePage Table of Contents Setting the Static Network Parameters Web Browser Setting for Proxy Server UseTroubleshooting Important Safety InstructionsNetworking FeaturesOverview Internet Sharing Easy to AdministerDhcp Dynamic Host Conﬁguration Protocol Server and Client SecurityWindows Macintosh System RequirementsFor extra orders, call Included AccessoriesRear View Part NamesFront View Light Color Indicates IndicatorsShape of RJ-45 and RJ-11 plug Diagram of Connections SetupBefore installing the KX-HGW200 Your current setupAfter installing the KX-HGW200 How the KX-HGW200 WorksPreparation Connecting the KX-HGW200 to a Cable/xDSL ModemTo connect computers using the HomePNA Connecting the KX-HGW200 to a Home NetworkTo connect computers using optional wireless cards To connect a computer directly to the KX-HGW200 Setup Turning on the Devices Conﬁguring the Computer Setup of a Microsoft Windows ComputerPlease make note for future reference Conﬁguring the Computer Installed gateways data setting ﬁeldSelect Disable DNS Page Setup of a Macintosh Computer Information Conﬁgure pop-up menuConﬁrmation of the Home Network Setup Conﬁrmation of the SetupWhen you use the proxy server setting For Windows For Macintosh If the dialog box does not appearIf the above screen does not appear Conﬁrmation of the SetupInternet Conﬁguration Internet Conﬁguration and ConﬁrmationConﬁrmation If a web site does not appearInformation System CommandsConﬁguration See the next page for instructions about each data ﬁeld Setting Up the ParametersBasic Setup Instructions for the data ﬁelds See p and 35 for instructions about each ﬁeld Additional SetupIP Masquerade ³IP Masquerade IP Address Home side ³IP AddressDhcp Server ³DHCP Server ³Available Address³Entry Port Forwarding³Protocol ³Forwarding PortPing Using the FunctionsRestart Clear SettingChange Password For Windows For Macintosh Firmware UpgradeError messages PPPoE Connection When the PPPoE connection is being madeWhen the PPPoE connection is not being made Usage Data StatusUser Registration Support Help To Restart the KX-HGW200 Restarting the KX-HGW200To Initialize the KX-HGW200 From the Tools menu, select Internet Options For WindowsIf the check box is checked, click Advanced Web Browser Setting for Proxy Server UseFor Macintosh Web Browser Setting for Proxy Server Use Static IP Network Dhcp server function inactive Setting the Static Network ParametersDynamic IP Network Dhcp server function active Select Specify an IP address Setup of a Windows ComputerWindow below appears Page Setup of a Macintosh Computer Click the close button Wall Mounting Wall Template Problem Cause and Remedy TroubleshootingProblem TroubleshootingPower WeightSpeciﬁcations LED DisplayImportant Safety Instructions Ringer Equivalence No. REN FCC and Other InformationFCC and Other Information For using the optional wireless cardAddress ﬁeld URL line IndexIndex Web Browser When you ship the product For product service