Panasonic KX-P7100 manual Auto Duplex Unit ADU, Auto Duplex Pinch and Registration Rollers

KX-P7100

3.14. Auto Duplex Unit, ADU Registration Roller and ADU Pinch Roller

Before handling, perform the following steps A-B :

A. Remove the Paper Cassette and OPC Drum Unit.

B. Place the printer up side down.

3.14.1. Auto Duplex Unit ( ADU )

(1)Remove the 2 screws ( A ) and 4 screws ( B ).

Caution:

Screw ( A ) is different from screws ( B ). When reinstalling the screw ( A ), return it to the original positon.

(2)Remove the Bottom Stay.

(3)Remove the Auto Duplex Unit with care to prevent damage to the A/D Unit Joint Gear {4 screws and screws (C)}.

3.14.1.1. Auto Duplex Pinch and Registration Rollers

1.Remove the 3 plastic rings and 2 springs.

2.Remove the A/D Roller Shaft and 2 Auto Duplex Pinch Rollers.

3.Remove the E-ring.

4.Remove the A/D Unit Joint Gear from the ADU Registration Roller Shaft. The Registration Roller Shaft and 2 bushings can be remove from the Auto Duplex Unit frame.

Note:

When reinstalling the A/D Rollers Shaft to ADU Pinch Roller Plate, ensure that it is installed as shown in Fig. ( A ).

45