Panasonic DP-2010E Other Features, Energy Saver/Interrupt Mode, Energy Saver Mode, Sleep Mode

Other Features

Energy Saver/Interrupt Mode

INTERRUPT (F1) Key ENERGY-SAVER Key

ENERGY SAVER	■ These modes can save power while the copier is not
	in use.
	Energy Saver Mode
	#To enter this mode
	Press the ENERGY-SAVERkey or the copier will
	automatically enter the ENERGY-SAVER Mode after
	15 minutes* from the last copy. The indicator will flash.
	$To cancel this mode and make copies
	Press the ENERGY-SAVERkey again.

Sleep Mode

#Automatically enters the Sleep Mode after 30 minutes from the last copy. The copier power will drop and the indicator will light.

	$To make copies, press the ENERGY-SAVERkey.
	Interrupt Mode
INTERRUPT	CThis mode can interrupt other copy jobs while
	making copies.
	#Press the INTERRUPT (F1) key, the indicator will
	light.
	$Make another copy job using the platen glass.

%Press the INTERRUPT (F1) key again to continue the original job.

Note: The ADF can not be used with interrupt. (Use only the Platen)

NOTE	∗ Energy saver time (15 minutes) and Sleep time (30 minutes) can be changed by the
	key operator. (See page 31)
		Modes	Power Consumption		Warm Up Time
		Normal Operation	Approximately	92 Wh	N/A
		Energy Saver Mode	Approximately	40 Wh	30 sec. recovery
		Sleep Mode	Approximately	1.5 Wh	30 sec. recovery

24