Panasonic DP-1810P, DP-2010E manual Digital Skyshot Mode

Other Features

Skyshot Mode

■Skyshot allows copying a manuscript without generating dark borders

even if the platen cover or ADF/i-ADF is opened.

Skyshot mode eliminates dark borders around the originals, and is especially convenient for copying small-sized originals like bank checks or documents with unusual shapes (round, oval, etc.). These documents can be reproduced without generating any unnecessary black areas simply by making a copy with the cover open.

Two types of Skyshot modes can be selected;

Digital Skyshot Mode : The scanning area (size) is not pre-determined.

Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in advance. (See page 30)

■Digital Skyshot Mode

1

Place the Original on the platen (Opening the Platen Cover/ADF)

2 3

Number of	Press
Copies	START Key

Making Copies

Note:The default setting of Digital Skyshot Mode is “NORMAL”. In this setting, the unit scans once. If there are black areas around the borders in the copies, set the Digital Skyshot Mode to “QUALITY” to soften the dark borders. In this setting, the unit scans twice.

	#Press the FUNCTION key.
	$Press the 2 key to select COPIER SETTINGS.
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧
	%Press the SET key.
2:COPIER SETTINGS
PRESS SET TO SELECT
	&Press 6 and SET key to select DIGITAL
COPIER PARAM. (00-14)
ENTER NO. OR ∨ ∧	SKYSHOT.
	(Press 1-3key to select the Digital Skyshot Mode.
06 DIGITAL SKYSHOT
	1: OFF	NONE
2:NORMAL
	2: NORMAL	Default setting (usually select this
		mode).
	3: QUALITY	For better definition, select the

Quality mode.

)Press the SET key. *Press the RESET key.

NOTE	CAn incorrect exposure may occur when there is a black line at the edge of
	the original or an image which the copier interprets as a black pattern in the
	Skyshot mode.

CAn incorrect position detection of the original may occur when a strong light shines onto the glass during Skyshot mode.

25