Panasonic DP-1810P, DP-2010E manual Select the Department Counter Mode

Page 37

Function

Function Setting for Key Operator

3 Select the Department Counter Mode.

14 DEPT.COUNTER MODE 1:TOTAL COUNTER

DEPT.	CODE (01-50)	Press 2 and the SET key.
ENTER	NO. OR ∨ ∧

4 Change the Department ID Code, limit the maximum number of copies and Department Counter number.

ID CODE 01:1234

MAX COPIES 01:123456

DEPT.COUNTER

01:123456

#Press the Keypad and the SET key to input the Department ID Code.

01: 1234 Department ID Code Department No.

$Press the Keypad and the SET key to input the maximun number of copies.

01: 123456		Maximun number of copies (6 digits)

Department No.

%Press the Keypad and the SET key (G or F keys) to select the Department No.

Making Copies

01: 123456		Counter (6 digits)

Department No.

&Press 0 and the SET key (Input “0”) to clear the counter.

NOTE	CTo reset the function mode, press the RESET key.

Image 37

Contents Options Before StartingEnglish Others Model and Serial Number Important InformationCommon Features and Usage Operation ChartEnergy Star Table of Contents Options Problem SolvingOthers For Your Safety PrecautionsLaser Safety Manufacturer’s name and address Factory IDToner and Paper Ventilation HandlingFCC Warning For U.S.A InstallationControl Panel LCD Display Contents Refer to Stop KeyInterrupt Key, Memory in Key, M1/M2 Keys Copy Size KeyFull Size Copying Basic CopyCopying the Same Size Originals $Select Exposure ControlReduction or Enlargement Copying Copying with Preset RatiosSelect the Copy Paper Tray keyZoom Zoom CopyingPress Cursor G or F keys to select Zoom Ratio Select Original$Adjust the side guides Using the Sheet BypassCopying on Special Paper, etc Press StartProcedure Creative Features1 Copy PressOriginals Place PressKey CopyOr Margin key Press BOOK, EdgeKey Operation Sided/1-Sided Copy For DP-2010EBook \ Press 2-Sided \ 2 / 2 \1 / 2 \ 2 Copy For DP-2010ESided Copy key Place the Original on the Platen Book \ 2 Copy For DP-2010ETo Store a Job in Memory Job MemoryTo Recall a Job Stored in Memory $Press the Memory in F2 keySort Copy Sort ModeSort Copy From Platen Glass onlyEnergy Saver/Interrupt Mode Other FeaturesEnergy Saver Mode Sleep ModeDigital Skyshot Mode Skyshot ModePlaten Upper- left corner Manual Skyshot ModeRemarks Combined Function TableNext Job Memory RetrievalFunction Using Function Modes to Change the Initial Copy ModesGeneral Functions Modes Function Initial SettingEdge Default Copier SettingsTCP/IP Address General Functions for Key OperatorCopier Settings for Key Operator Changing the Auto Exposure Setting Function SettingPress the Function key Proceed as Follows Changing the Paper Size Function Setting for Key OperatorPaper IndicatorStopper Guide a Paper Guide b SizeDepartment Counter Select the Department Counter Mode Page Components AccessoriesAutomatic Document Feeder FeaturesADF DA-AS180 / i-ADF DA-AR201 ComponentsPlace OperationOriginal Inappropriate OriginalsAdding Paper J Problem SolvingSheet Paper Tray Open the Front Cover Adding the Toner and Replacing Toner Waste Container ?Remove the Toner Waste Container by Slowly pulling it towards the left asProblem Solving Paper Misfeed Locations Removing a Misfed PaperRemove the misfed paper Paper Exit AreaOpen the Right Cover Remove the misfed paper Paper Entry/Transport AreaHot HeatedOpen the Right Cover ADU Area For DP-2010E onlyClose the Right Cover Paper Feed Module ADF For DP-2010E only ADF Before Calling Service TroubleshootingCheck Action Unit Does Not OperateLight Copies Add Toner Warning IndicatorMarked Copies As a rule, clean weekly User Error Codes U CodeDP-1810P/2010E Copier SpecificationsADF DA-AR201 ADF DA-AS1802nd/4th Paper Feed Module DA-DS182 3rd Paper Feed Module DA-DS183For Printer Options and SuppliesFor Network Printing SuppliesPage Page Warranty