Panasonic DP-2010E manual Specifications, DP-1810P/2010E Copier

Page 55

Specifications

■DP-1810P/2010E (Copier)

Type	Desktop

Platen Type	Fixed

Acceptable Originals	Sheets, Books (max. size = Ledger)

Copying Method	Laser Electrophotography

Fixing Method	Heat Roller Fixing

Imaging Method	Dry-Type Single component imaging

Resolution	Max. 600 dpi

Maximum Copy Size	Ledger

Minimum Copy Size	Invoice, via paper tray

Void Area	Max. 0.2 in (5 mm)

Warm Up Time	Approx. 30 seconds (68°F/20°C)

First Copy Time	Approx. 6.5 seconds (Letter , from 1st tray)

Multi-Copy Speed	DP-1810P : 18 cpm (Letter size)
	DP-2010E : 20 cpm (Letter size)

Enlargement Ratios	Preset: 121 %, 129 %, 155 %, 200 %
	Variable: from 101 to 200 % in 1 % increments

Reduction Ratios	Preset: 79 %, 77 %, 65 %, 61 %, 50 %
	Variable: from 99 to 50 % in 1 % increments

Paper Feed	Paper Tray (550 sheets ⋅ 1) + Sheet Bypass (50 sheets)
	2nd Paper Feed Module (550 sheets - option)
	3rd Paper Feed Module (550 sheets - option)
	4th Paper Feed Module (550 sheets - option)

Paper Weight	Paper Tray: 16 - 24 lb (60 - 90 g/m2)
	[Sheet Bypass: 15 - 34 lb (56 - 128 g/m2)]
Quantity Selector	Max. 999 sheets (Output Tray capacity is 250 sheets)

Electrical Consumption	AC 120 V, 50/60 Hz, 9 A

Energy Consumption	Max. 1.2 kW, 1.5 Wh in Sleep Mode

Dimensions (W ⋅ D ⋅ H)	DP-1810P: 23.1 ⋅ 23.8 ⋅ 18.0 in (588 ⋅ 605 ⋅ 458 mm)
	DP-2010E: 23.1 ⋅ 23.8 ⋅ 22.6 in (588 ⋅ 573 ⋅ 573 mm)
Weight	DP-1810P: 90 lb (41 kg)
	DP-2010E: 113 lb (51 kg)
Operating Environment	Temperature: 50 - 86°F (10 - 30°C) Relative Humidity: 30 - 80 %
	(However, the humidity should be 70 % or less at a temperature of 86°F (30°C),
	and the temperature should be 86°F (30°C) or less at a humidity level of 85 %.)

CSpecifications are subject to change without notice.

Others

55

Image 55

Contents Options Before StartingEnglish Others Model and Serial Number Important InformationCommon Features and Usage Operation ChartEnergy Star Table of Contents Options Problem SolvingOthers Manufacturer’s name and address Factory ID PrecautionsFor Your Safety Laser SafetyToner and Paper Ventilation HandlingFCC Warning For U.S.A InstallationControl Panel Copy Size Key Contents Refer to Stop KeyLCD Display Interrupt Key, Memory in Key, M1/M2 Keys$Select Exposure Control Basic CopyFull Size Copying Copying the Same Size OriginalsPaper Tray key Copying with Preset RatiosReduction or Enlargement Copying Select the CopySelect Original Zoom CopyingZoom Press Cursor G or F keys to select Zoom RatioPress Start Using the Sheet Bypass$Adjust the side guides Copying on Special Paper, etcPress Creative FeaturesProcedure 1 CopyCopy Place PressOriginals KeyOr Margin key Press BOOK, EdgeKey Operation Sided/1-Sided Copy For DP-2010EBook \ Press 2-Sided \ 2 / 2 \1 / 2 \ 2 Copy For DP-2010ESided Copy key Place the Original on the Platen Book \ 2 Copy For DP-2010E$Press the Memory in F2 key Job MemoryTo Store a Job in Memory To Recall a Job Stored in MemoryFrom Platen Glass only Sort ModeSort Copy Sort CopySleep Mode Other FeaturesEnergy Saver/Interrupt Mode Energy Saver ModeDigital Skyshot Mode Skyshot ModePlaten Upper- left corner Manual Skyshot ModeJob Memory Retrieval Combined Function TableRemarks NextFunction Using Function Modes to Change the Initial Copy ModesGeneral Functions Modes Function Initial SettingEdge Default Copier SettingsTCP/IP Address General Functions for Key OperatorCopier Settings for Key Operator Proceed as Follows Function SettingChanging the Auto Exposure Setting Press the Function keyChanging the Paper Size Function Setting for Key OperatorSize IndicatorPaper Stopper Guide a Paper Guide bDepartment Counter Select the Department Counter Mode Page Components AccessoriesComponents FeaturesAutomatic Document Feeder ADF DA-AS180 / i-ADF DA-AR201Inappropriate Originals OperationPlace OriginalAdding Paper J Problem SolvingSheet Paper Tray Slowly pulling it towards the left as Adding the Toner and Replacing Toner Waste Container ?Open the Front Cover Remove the Toner Waste Container byProblem Solving Paper Misfeed Locations Removing a Misfed PaperRemove the misfed paper Paper Exit AreaHeated Paper Entry/Transport AreaOpen the Right Cover Remove the misfed paper HotOpen the Right Cover ADU Area For DP-2010E onlyClose the Right Cover Paper Feed Module ADF For DP-2010E only ADF Unit Does Not Operate Troubleshooting Before Calling Service Check ActionLight Copies Add Toner Warning IndicatorMarked Copies As a rule, clean weekly User Error Codes U CodeDP-1810P/2010E Copier Specifications3rd Paper Feed Module DA-DS183 ADF DA-AS180ADF DA-AR201 2nd/4th Paper Feed Module DA-DS182Supplies Options and SuppliesFor Printer For Network PrintingPage Page Warranty