Panasonic DP-1810P, DP-2010E manual Installation, FCC Warning For U.S.A

Page 9

Precautions

Installation

■The copier should not be installed in areas with the following conditions:

CExtremely high or low temperature and humidity.

Ambient conditions

Temperature: 50 – 86°F (10 – 30°C)

Relative humidity: 30 – 80 %

CWhere temperature and humidity can change rapidly, causing condensation.

CDirect exposure to sunlight.

CDirectly in the air conditioning flow.

CIn areas of high dust concentration.

CIn areas of poor ventilation.

CIn areas with chemical fume concentration.

CIn areas with extreme vibration.

CWith unstable or uneven conditions (floors, etc.).

■The maximum power consumption is 1.2 kW.

A properly wired (grounded), dedicated, 15 A, 120 VAC outlet is required. Do not use an extension cord.

The power cord on this equipment must be used to disconnect the main power.

Please ensure that the socket outlet is installed near the equipment and is easily accessible.

FCC WARNING For U.S.A.

FCC WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

The user could lose the authority to operate this equipment if any unauthorized changes or modifications are made to this equipment.

Before Starting

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Before Starting OptionsEnglish Others Model and Serial Number Important InformationCommon Features and Usage Operation ChartEnergy Star Table of Contents Problem Solving OptionsOthers For Your Safety PrecautionsLaser Safety Manufacturer’s name and address Factory IDToner and Paper Ventilation HandlingFCC Warning For U.S.A InstallationControl Panel LCD Display Contents Refer to Stop KeyInterrupt Key, Memory in Key, M1/M2 Keys Copy Size KeyFull Size Copying Basic CopyCopying the Same Size Originals $Select Exposure ControlReduction or Enlargement Copying Copying with Preset RatiosSelect the Copy Paper Tray keyZoom Zoom CopyingPress Cursor G or F keys to select Zoom Ratio Select Original$Adjust the side guides Using the Sheet BypassCopying on Special Paper, etc Press StartProcedure Creative Features1 Copy PressOriginals Place PressKey CopyOr Margin key Press BOOK, EdgeSided/1-Sided Copy For DP-2010E Key OperationBook \ \ 2 / 2 \1 / 2 \ 2 Copy For DP-2010E Press 2-SidedSided Copy key Place the Original on the Platen Book \ 2 Copy For DP-2010ETo Store a Job in Memory Job MemoryTo Recall a Job Stored in Memory $Press the Memory in F2 keySort Copy Sort ModeSort Copy From Platen Glass onlyEnergy Saver/Interrupt Mode Other FeaturesEnergy Saver Mode Sleep ModeDigital Skyshot Mode Skyshot ModePlaten Upper- left corner Manual Skyshot ModeRemarks Combined Function TableNext Job Memory RetrievalFunction Using Function Modes to Change the Initial Copy ModesGeneral Functions Modes Function Initial SettingEdge Default Copier SettingsTCP/IP Address General Functions for Key OperatorCopier Settings for Key Operator Changing the Auto Exposure Setting Function SettingPress the Function key Proceed as FollowsChanging the Paper Size Function Setting for Key OperatorPaper IndicatorStopper Guide a Paper Guide b SizeDepartment Counter Select the Department Counter Mode Page Components AccessoriesAutomatic Document Feeder FeaturesADF DA-AS180 / i-ADF DA-AR201 ComponentsPlace OperationOriginal Inappropriate OriginalsProblem Solving Adding Paper JSheet Paper Tray Open the Front Cover Adding the Toner and Replacing Toner Waste Container ?Remove the Toner Waste Container by Slowly pulling it towards the left asProblem Solving Paper Misfeed Locations Removing a Misfed PaperRemove the misfed paper Paper Exit AreaOpen the Right Cover Remove the misfed paper Paper Entry/Transport AreaHot HeatedADU Area For DP-2010E only Open the Right CoverClose the Right Cover Paper Feed Module ADF For DP-2010E only ADF Before Calling Service TroubleshootingCheck Action Unit Does Not OperateAdd Toner Warning Indicator Light CopiesMarked Copies As a rule, clean weekly User Error Codes U CodeDP-1810P/2010E Copier SpecificationsADF DA-AR201 ADF DA-AS1802nd/4th Paper Feed Module DA-DS182 3rd Paper Feed Module DA-DS183For Printer Options and SuppliesFor Network Printing SuppliesPage Page Warranty

DP-1810P, DP-2010E specifications

The Panasonic DP-2010E and DP-1810P are multifunctional printers designed to meet the demands of modern office environments. Known for their reliability and efficiency, these models stand out in the competitive landscape of office equipment with a host of impressive features and technologies.

The DP-2010E is a robust multifunction printer that offers printing, copying, and scanning capabilities. It boasts a print speed of up to 20 pages per minute, which makes it suitable for medium to high-volume printing tasks. The device is equipped with a 600 x 600 dpi resolution, ensuring that documents come out crisp and clear. What sets the DP-2010E apart is its automatic duplex printing feature, which allows users to print on both sides of the paper, thereby saving on resources and reducing paper usage.

On the other hand, the DP-1810P is designed for those who need a reliable and fast monochrome printer without the additional functionalities of copying and scanning. It maintains a similar print speed of up to 18 pages per minute and offers a 1200 x 600 dpi resolution for outstanding print quality. The compact design makes it ideal for smaller workspaces, while still delivering performance that complements larger office machines.

Both models utilize Panasonic's advanced digital imaging technology, which enhances the accuracy and clarity of prints. They also feature an easy-to-use control panel that simplifies operations, enabling users to navigate through tasks effortlessly.

A significant characteristic of these printers is their energy efficiency. They are equipped with energy-saving modes that help reduce power consumption during periods of inactivity, aligning with environmentally friendly practices. This feature not only lowers operational costs but also contributes to a greener workplace.

Connectivity options are also notable in these printers. They come with standard USB connectivity, allowing users to connect directly to computers. For expansive office setups, optional network interfaces can be integrated, providing added flexibility for shared access among multiple users.

In conclusion, the Panasonic DP-2010E and DP-1810P multifunction printers are designed to offer high-speed printing, advanced imaging technology, and energy efficiency. These features make them suitable for a variety of office environments, ensuring reliability and productivity for any business looking to invest in dependable printing solutions.
Top Page Image Contents