Panasonic DP-200 manual Copier Settings for Key Operator

Function

Copier Settings for Key Operator

No.	Modes	Function	Initial
			Setting
00	PAPER SIZE PRIOR.	Specifies the paper size in manual paper size	Letter
		setting mode.
01	ORIGINAL (HOME)	Selects original setting	Text/Photo
		CText, Text/Photo, Photo
02	TEXT CONTRAST	Selects contrast for Text mode	3
		C1 ~ 5
03	T/P CONTRAST	Selects contrast for Text/Photo mode	3
		C1 ~ 5
04	PHOTO CONTRAST	Selects contrast for Photo mode	3
		C1 ~ 5
10	MAX. COPY SETTING	Determines whether to limit number of copies	0
		C0 (No limit) ~ 999	(No limit)
11	MULTI-SIZE ROTATE	When using the same size paper in Multi-size	VALID
		feeding mode, select the paper direction by
		rotating or not.
		CINVALID, VALID
12	M1, SIZE	Input a size in memory 1 for frequent usage	70 ⋅	160 mm
		size.	(X)	(Y)

CX: 5~432/Y: 5~297 mm (See P.26)

13	M2, SIZE	Input a size in memory 2 for frequent usage
		size.
		CX: 5~432/Y: 5~297 mm
		(See P.26)

95 ⋅ 220 mm

(X) (Y)

16	MEM. FULL ACTION	Selects the memory full action	Print
		CPrint, Cancel
18	COPY OUTPUT TRAY	∗ Sets the stack position for the copied paper.	Inner 1
		CInner 1, Inner 2, Outer

NOTE CIt is necessary to input the Key Operator ID code before changing items on this page.

∗Not needed in copying mode, but needed when installing options for advanced functions (see page 38).

32