Panasonic CF-30KTPAXxM service manual Self Diagnosis Test, When you execute an automatic test

Page 18

7 Self Diagnosis Test

As for the self-diagnosis test(PC-Diagnostic utility) to use this model, a standard test and the enhancing test by the module of the main body building in are possible.

●Notes To skip BIOS password

Use <Ctrl>+<F10> key to skip BIOS password or authentication of fingerprint. This key is only for entering DIAG mode. Not available to boot the computer. If customer set "HDD Lock", the DIAG program cannot perform HDD test.

*This key is for service purpose only. Do not disclose this information to unrelated others.

1.Beginning of self-diagnosis test 1-1. Setting of content of setup

1.The power supply of the computer is turned on.

2." F2 " is pushed on the screen of "Panasonic" while " press <F2 to enter Setup> " is displayed.

3.The setup utility starts and then takes notes of the content of the BIOS setup of present set.

4." F9 " is pushed, " Yes" is selected on the screen of " Is the default value loaded? ", and " Enter" is pushed.

5." F10 " is pushed.

6." Yes" is selected on the screen of the setup confirmation, and " Enter" is pushed.

7.The computer starts automatically.

Attention

If the device which can be set is set to "Invalidity" by "Advanced" or "Security" menu, becomes an error by "PC-Diagnostic utility".

(It is judged that the device which can be set to "Invalidity" by "Main" menu such as "Flat pad" is normal if the controller operates normally though sets to "Invalidity" by the setup. )

In the model with built-in DVD of the USB connection, even if DVD is normal, becomes an error if legacy USB is set to "Invalidity"

1-2. When you execute an automatic test

1."Ctrl" + "F7" is pushed while the "Panasonic" start screen is displayed after the computer is started.

2.The test of all devices begins automatically by "PC-Diagnostic utility" 's starting.

Attention

It is a test which the customer who bought PC can execute. (As for HDD, the enhancing test is also possible.)

A flat pad does not work for a while after starting "PC-Diagnostic utility".

The movement of a flat pad might become abnormal If after RAM begins from the CPU/System test, a flat pad will be operated in about 30 seconds. In that case,restarts pushing"Alt" + "Ctrl" + "Del" key. Or, please start "PC-Diagnostic utility" again after doing the power supply switch in the slide, and turning off the power supply.

1-3. When you execute the enhancing test

1.Please let me discontinue diagnosing clicking to end an automatic test.

2.Please click on the character of "D" "PC-Diagnostic utility" on the screen while pushing both of right "Shift" and left "Shift" keys.

3.All devices which can select the enhancing test make the setting of the enhancing test possible.

4.The district device is made"FULL" display (enhancing test).

5.The test begins clicking .

*Please refer to item 4 for the error result of each test and the division of the breakdown part.

7-1

Image 18
Contents Model No. CF-30KTPAXxM How to replace the fuse For U.KLaser Safety Information Safety Precautions Precautions Battery Pack Contents Specifications Main SpecificationsWireless LAN Only for model with wireless LAN Only for North America Tooth Disabling/Enabling Wireless Communi Names and Functions of PartsReady. It does not necessarily indicate the On/Off C D E F G H Diagram BlockDiagnosis Procedure Troubleshooting Beep signal sound Error message Power-On Self Test Boot CheckError Diagnosis by Checking Beep Signal Sound Outline of PostStuck key 02F0 CPU ID When you execute an automatic test Self Diagnosis TestOperation of PC-Diagnostic Utility Selection of tested device T . technology Record area frequently accessed DMA, INT, TIMER, RTC operation are confirmedMemory access pattern based on Wireless LAN modem controllerWiring between Super I/O Content of Standard Test Content of Extend TestExpress Card Connector Test ItemWiring Connection Diagram Disassembly/Reassembly Removing the Battery PackPreparation HDD Pack Removing the HDD Antenna Cableblack Removing the Dimm Cover and Bot Tom Cover Antenna PCBRemoving the FPC HDD BAT ConnectorConnector CN801 Removing the PAD PCBMP PCB SD PCB LID Removing the Handle and Power Removing the Display Unit RDYRemoving the Inverter PCB, TS PCB and LCD Unit Removing the Antenna PCB LSetting the Antenna PCB L and R Arranging the Antenna L and R CablesSetting the Inverter PCB, TS PCB and LCD Unit Preparation of InverterINV PCB Assembly of LCD Unit Preparations LCD CableLCD Cable TOP Case INV-PWBNEW GPS Assembly of LCD Unit Only the model who doesnt have T/SInsert the CN Process the Cable fromScrew Antenna Screw ANT CornerScrew ElementConnection of LCD Cables Setting the Display UnitScrews N9 DRYN4+J10FKL Screws N10 DXSB4+15FNLB Be overlappedSet the Power SW Setting the Handle and Power SWSet the WM SW using the 2 Screws K2-42 Fix the Handle Base L / R using the 2 Screws K2-41Preparation of SW LED FPC Assembly of Power SW Assembly of Palm Top CoverPaste Insulation with a chassis Setting the I/O PCBO㩷SUB PCB Tighten ScrewSetting the SD PCB, Express Card Pcmcia Card S1Insulation S2Bitten S3Sharp Edge S4Part No. Check S5OtherSetting the Main PCB 2NGCUGKPUWNCVGVJG S1 YJGTGQWJCXGPQ ECDNGENQVJGUMDC Assembly of LAN, Modem and MDC Assembly of Main PCB ChassisTape Setting the PAD PCBPWB PAD LED PWBSetting the FPC HDD BAT Preparation of HDD FPC ASS’YBatt HDD Guide FPC CushionFPC FIG1 ANT SW PCB #VVCEJ Setting the USB PCB and Antenna PCBFPC Assy #VVCEJ LCDAssembly of USB / Antenna PCB Setting the Dimm Cover and Bot- tom Cover Preparation of Dimm CoverAttach the Dimm Cover Spacer Dimm Cover is set ~ 0.5mm Set W-LAN Module Setting the W-LAN Module, GPS PCB and Bluetooth PCBConnect the Cable to the Connector CN25 LANSetting the KB Cable Cover, Keyboard and LCD Cable Cover Cable SheetWhip ANT Cable SUB ANT Cable Main ANT Cable Assembly of LCD Cable Plate Arranging the KeyboardLCD Cable Cover Cushion Setting the HDD Screws N2 DRHM5054XA Screws N6 DRQT26+E4FKLHDD U Case Ass’y Fit to the corner Connect Connector Insert HDD FPC Ass’yPreparation oh HDD ASS’Y Hwater Fixed Tape CenterMetal Plate Push and bend Attach it to HDD closely not to loosenHDD Cushion Black Longer Direction Attach the HDD Cushion YelllowSEC HDD Ass’y insertion Sata Guard is installed Setting the Battery Pack and HDD Pack Set the HDD Pack Set the Battery PackExploded View CF-30KTPAXxMK1-4 45 0.05 N.m 19 0.02 N.m0.2 kgf.cm 0.5 kgf.cm314 + 0.0196 N.m 19 + 0.02 N.m216 + 0.0196 N.m 441 + 0.049 N.mScrew tightening torque 45 + 0.50 N.m 13.0 + 2.0 kgf.cmK9-1-4 Screw tightening torque N13 Replacement Parts List Accessories CN Latch Lever Speaker Case a Hinge Cover L DFHR8521ZA Batt CN PIN Cushion DFHR3N35ZA Busteraid Sheet NRP 851 857 861 872 97, 100, 114 26, 46, 47, 48, 50 F1G1C104A042 CAPACITOR, 16V, 0.1µF761 358756 766 768 769 770 771 773 774 775 776 778 779 853, 854K1MN40AA0018 209K1MN50AA0018 K1KA14AA0266K1MN80BA0246 CN 7, 8, 11 K1MY40BA0220K1KY10BA0214 K1MY30AA0158IC 31, 86 C0JBAS000215 C3FBNY000187C2CBYY000639 C0CBCBC00181 C1CB00002983 IC 32, 61, 68, 87, 108 C0JBAA000362G1C1R0MA0289 48, 64, 69 J0JYC0000098G1C1R0MA0380 G1C100MA0077481 650 33, 45951 68, 70 10, 240, 37493, 94, 96 D1HY5608A007 85, 245, 491, 492499, 624, 632, 634 881, 882, 889, 895 900 922 95, 100 D1H85604A024RESISTOR, 1/16W, 9.09KΩ 365 348349 RESISTOR, 1/16W, 680KΩ 368 370, 655RESISTOR, 1/16W, 1.5KΩ 661 656RESISTOR, 1/16W, 6.98KΩ 658 RESISTOR, 1/16W, 3.9W 663, 664CAPACITOR, 6.3V, 120µF 100 K1KA14BA0014 RESISTOR, 1/16W, 100Ω100, 101 101, 102 K1FY104BA024SW 800 802RESISTOR, 1/16W, 2.2KΩ 808 D1H81034A024 800 H2D400400012 OSCILLATOR, 4MHz