Panasonic CF-30KTPAXxM service manual Arranging the Keyboard, Assembly of LCD Cable Plate

■Arranging the Keyboard

Conductive Cloth Paste

㪇㫕㪇㪅㪌

㪇㫕㪇㪅㪌 㪇㫕㪇㪅㪌

㪇㫕㪇㪅㪌 Conductive Cloth

Paste

Keyboard is installed

1.Attach Keyboard , Keyboard Spacer Tape and Keyboard Back Plate. (Insert the KB protrusions into the plate holes and determine the position.)

2.Attach Conductive Cloth to Keyboard Back Plate.

3.Attach Keyboard Spacer Sheet to Keyboard Back Plate.

(Ensure Keyboard Spacer Sheet does not run over the level of Keyboard Back Plate.)

Attach the

Keyboard Plate hole

Spacer Tape

Attach the

Keyboard

Back Plate

Attach the Keyboard Spacer Sheet

<Notes>

1.Apply the load when attaching the attaching parts. 20~30䰚䯴2~3Kgf䯵/cm2 Reusing the attaching parts is impossible

■Assembly of LCD Cable Plate

CAUTION	S1:Insulation S2:Bitten S3:Sharp Edge
	S4:Part No. Check S5:Other

(Notes) DFHR3M83ZA

1.Apply the load when attaching the attaching parts. 20~30N (2~3Kgf)/cm2

LCD CABLE COVE Set

LCD CABLE COVER CUSHION

	KB CABLE COVER CUSHION		S3
		To prevent from
	CD Edge Sheet Attach.	touching the
		KBD Cable
	0~1mm
			4~6mm
KB CABLE COVE Set

LCD CABLE COVER CUSHION Attach.

KB CABLE COVER CUSHION Attach.

9-35