Panasonic CF-30KTPAXxM Setting the Dimm Cover and Bot- tom Cover, Preparation of Dimm Cover

9.2.14. Setting the DIMM Cover and Bot- tom Cover

1.Set the Bottom Cover.

2.Fix the Bottom Cover using the 6 Screws <N8> (No1 to No6).

3.Fix the Bottom Cover using the 2 Screws <N17> (No1, No2).

4.Fix the Bottom Cover using the 13 Screws <N6> (No1 to No13).

5.Set the DIMM memory card.

6.Attach the DIMM Heat Plate.

7.Fix the DIMM Stopper Base using the 2 Screws <N6>.

8.Fix the DIMM Cover using the 5 Screws <N1>.

Screws <N1>: DRHM0002ZA

Screws <N5>: DRQT26+D4FKL

Screws <N6>: DRQT26+E4FKL

Screws <N8>: DRSB3+8FKL

Screws <N17>: DRQT26+E6FKL

Note:

Tighten the Screws in the numbered order (No1 to No6). Tighten the Screws in the numbered order (No1 to No13). Tighten the Screws in the numbered order (No1 to No5).

■Preparation of DIMM Cover

	No.5	No.2		No.3
	No.4 <N1>	<N1>		<N1>
	<N1>
DIMM Cover
	No.1
	<N1>
	<N6>	<N6>
DIMM Stopper
Base
DIMM Heat
Plate
DIMM Memory
Card			No.6
	No.2 No.1
			<N8>		No.7
	No.2 <N8><N6>		No.5
	<N6>				<N6>
No.8			<N8>		No.6
<N6>					<N6>
No.10	No.9				No.4
	<N6>
<N6>					<N8>
No.3					No.5
<N8>
					<N6>
	No.12
	<N6>				No.4
	No.11
					<N6>
	<N6>		No.13
			<N6>		No.3
					<N6>
Bottom Cover					No.1
					<N8>

* Notes:

1.Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2 Attach the DIMM Cover Cushion

Attach the DIMM Cover Spacer

DIMM Cover is set

0 ~ 0.5mm

0 ~ 0.5mm

0 ~ 0.5mm

0 ~ 0.5mm

9-32