Panasonic KX-T206E manual Precaution

Page 5

Precaution

Keep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps, motors and television. These noise sources can interfere with the perform- ance of the Electronic Modular Switching System.

This unit should be kept free of dust, moisture, high temperature (more than 40˚C/104˚F) and vibration, and should not be exposed to direct sunlight.

Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.

If there is any trouble, disconnect the unit from the telephone line. Plug the telephone directly to the telephone line. If the telephone operates properly, do not reconnect the unit to the line until the trouble has been repaired. If the telephone does not operate properly, chances are that the trouble is in the telephone system, and not in the unit.

Do not use benzine, thinner, or the like, or any abrasive powder to clean the cabinet. Wipe it with a soft cloth.

WARNING

THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED SERVICE PERSONNEL.

WHEN A FAILURE OCCURS WHICH RESULTS IN THE INTERNAL PARTS BE- COMING ACCESSIBLE, DISCONNECT THE POWER SUPPLY CORD IMMEDIATELY AND RETURN THIS UNIT TO YOUR DEALER.

DISCONNECT THE TELECOM CONNECTION BEFORE DISCONNECTING THE POWER CONNECTION PRIOR TO RELOCATING THE EQUIPMENT, AND RECONNECT THE POWER FIRST.

THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG. FOR SAFETY REASONS THIS PLUG MUST ONLY BE CONNECTED TO AN EARTHING CON- TACT SOCKET WHICH HAS BEEN INSTALLED ACCORDING TO REGULATIONS.

THE POWER SOCKET WALL OUTLET SHOULD BE LOCATED NEAR THIS EQUIPMENT AND BE EASILY ACCESSIBLE.

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

73/23/EEC

89/336/EEC

92/31/EEC

93/68/EEC

5

Image 5
Contents Electronic Modular Switching System For future reference System ComponentImportant Information For Your Safety Please Read the Following Text CarefullyOperation in Power Failure Precaution Table of Contents General Descriptions SpecificationsCharacteristics Safety Installation Instructions Before InstallationInstallation Precautions Wiring PrecautionsName and Location UnpackingOverview of the Main Unit Inside View of the Main UnitFrame Ground Connection Wall MountingOpening Front Cover System Connection Diagram CO Line Connection Extension Connection Wire Diameter of conductorParalleled Telephone Connection Door Opener Connection Installation of Optional Card and UnitDoorphone KX-T30865 Connection Disa Card KX-T20691 Connection Overview Installation of Lightning ProtectorsInstallation Outside Installation of an Earth RodStarting the System Power Failure TransferGeneral Programming Instructions System Speed Dialling Number Set System ProgrammingDial Type Selection Outgoing Permitted CO1 Assignment Day/NightCO2 Ringing Assignment Day/Night Outgoing Permitted CO2 Assignment Day/NightCO1 Ringing Assignment Day/Night Toll Restriction TRS Class Assignment Day/Night Doorphone Assignment Day/NightOGM Recording TRS Denied Code Class 2TRS Denied Code Class OGM Play CO1 Delayed Ringing AssignmentTRS Excepted Code CO2 Delayed Ringing AssignmentDelayed Ringing Count Selection Door Opener Assignment Day/Night Switching ModeDay/Night Starting Time System Data ClearOther Programs Hookswitch Flash Time Range Assignment CO Indicator AssignmentDoor Opener Access Time Disa Ringing Time AssignmentLeast Cost Routing LCR Programs LCR Sequence chartConditions Tone Tone / Ring ToneSec Ring Tone#00 System Speed Dialling Number Set Programming Tables#14 CO 2 Delayed Ringing Assignment #13 CO 1 Delayed Ringing Assignment#15 Delayed Ringing Count Selection #12 Fax Connection#61 Door Opener Assignment #70 Day/Night Switching Mode#71 Day/Night Starting Time #83 LCR Route Selection Code#88 LCR Route Exceptional Code Page Templet Panasonic Business Systems U.K