Panasonic KX-T206E manual Specifications, General Descriptions, Characteristics

Specifications

General Descriptions

1.	Capacity	CO line	2
		Extension	6
2.	Control Method	Stored Program CPU: 8 bits CPU
		Control ROM: 64 KB, Control RAM: 8 KB
3.	Switching Method	Space Division CMOS Crosspoint Switch
4.	Power Supplies	Primary	AC 110–240 V, 50/60 Hz
		Secondary	Circuit Volt: +5V, +15 V, +30 V
		Power Failure	CO 2 assigned to extension 22
5.	Dialling	Outward		Dial Pulse	10 PPS
				Tone Dial
		Internal		Dial Pulse	10 PPS, 20 PPS
				Tone Dial
		Mode Conversion		DP-DTMF, DTMF-DP
6.	Connector	CO		4-pin connector
		Extension		4-pin connector
		Doorphone		4-pin connector
7.	EXT Connection	Cable		1 pair wire (single line telephone)
				2 pair wire (proprietary telephone)
8.	Intercom paths	2 (including the doorphone path)
Characteristics
1.	Station Loop Limit	Proprietary telephone		40 ohms
		Single line telephone		600 ohms including set
		Doorphone		20 ohms
2.	Minimum Leak Resistance	15000 ohms
3.	Maximum Number of Station
	Instruments per line	1 (proprietary telephone) or 3 (single line telephone)
4.	Ring Voltage	90 Vrms at 25 Hz depends on Ringing Load
5.	Primary Power	AC 110–240 V, 50/60 Hz, 0.5 A maximum
6.	Central Office Loop Limit	1600 ohms maximum
7.	Environmental Requirements ...	0–40˚C, 10%–90% (Humidity)

7