Panasonic KX-T206E manual General Programming Instructions

General Programming Instructions

Default Setting	This system has a default factory setting. If any of the program-
	ming needs to be changed, you can change the setting by system
	programming.
Required Telephone Set	You can use any of the following telephones for system program-
	ming:
	• Proprietary Telephone (PT): KX-T7130, KX-T7020, KX-T7050
	• Single Line Telephone (SLT): tone type
	All telephones (except KX-T7130) do not have display panels, so
	you cannot check the setting you have made. Therefore, please use
	KX-T7130 to check the programming.
Extensions Used for	System programming can only be performed from extension 21.
Programming
To Check the	Use KX-T7130. When you check the assignment, set the
Programmed Data	MEMORY switch on PT to “PROGRAM”.
	Enter “#” and the program address.
	You cannot check programs #60, #62, #63, #65, #67, #84 and #85,
	as they are not displayed on the display panel.

Before Programming To enter the system programming mode:

	[Off-hook]6 2 0 6 2 0 6
After Programming	To exit the system programming mode:

[Off-hook] 6 2 0 6

20