Panasonic KX-T206E manual Extension Connection, Wire Diameter of conductor

Extension Connection

Wire Specification The wire specifications are as follows:

Wire

Diameter of conductor

Solid wire

ø 0.4 – ø 0.65 mm

	Diameter with coating	ø 0.66 – ø 1.05 mm
Connection	Use a 4-pin plug (included) to connect extension lines.
	There are 6 plugs to connect extensions to EXTN. 1 through EXTN. 6
	jacks.

1.Lift the transparent part.

2.Insert the required telephone wires into the holes of the plug. Then press the transparent part back into the black part.

Note: Do not strip the wires.

Insert the wires all the way into the plug.

For a proprietary telephone

H

A

B

L

	DOOR
	OPENER
	EXTN.	EXTN.
	5	6
	EXTN.	EXTN.
	3	4
	EXTN.	EXTN.
	1	2
SYSTEM	CO 2	DPH
	CO 1

For single line telephones

A

B

EXTN.	H
	A

1 B

L

GROUND

To extensions

Notes

•A facsimile must be connected to EXTN.6 jack if an optional DISA/FAX Detect card (KX- T20691) is installed. See page 16 to install the card. System programming is also required. The “#12 Fax Connection” program should be assigned as “ENABLE”. See page 25. The “#24 Call Incoming Mode Selection” program should be assigned as “DISA”. See page 28.

•The EXTN.1 through EXTN.6 jacks correspond to extension numbers 21 through 26 respec- tively.

•You can use cable holders to fix the wires.

13