Panasonic CF-T4HWETZBM service manual Main Specifications

Page 10

￿2. Specifications

￿

￿ Main Specifications

CPU/

Secondary cache memory

Chip Set

Main Memory

Video Memory

Hard Disk Drive (Replaceable)

Display Method

Internal LCD Display

External Display*5

Simultaneous Display on LCD + Exter- nal Display*5

Wireless LAN

LAN*6

Modem

Sound

Card Slots

RAM Module Slot

Interface

Keyboard/Pointing Device

Power

AC Adaptor*10

Battery Pack

Operating Time*11

Charging Time*14

Power Consumption*15

Physical Dimensions (W × H × D) (excluding the stylus holder)

Weight*17

Environment Operation TemperatureHumidity

Storage Temperature

Humidity

OS*18

Pre-installed Software*18

Intel® Pentium® M Processor Ultra Low Voltage 753 (1.20 GHz, 2 MB*1 L2 cache, 400 MHz FSB)

Intel® 915 GMS Express chip set

512 MB*1, DDR2 SDRAM (1024 MB*1 Max.) UMA (128 MB*1 Max.)*2

60 GB*3

12.1XGA type (TFT) (1024 × 768 dots) 65,536/16,777,216 colors (1024 × 768 dots)*4

65,536/16,777,216 colors (800 × 600 dots/1024 × 768 dots/1280 × 768 dots/1280 × 1024 dots/1600 × 1200 dots/2048 × 1536 dots)

65,536/16,777,216 colors (800 × 600 dots, 1024 × 768 dots)*4

Built-in Intel® PRO/Wireless 2915 ABG

IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX Data: 56 kbps(V.92) FAX: 14.4 kbps

WAVE and MIDI playback, Monaural Speaker (built in)

PC Card Slot × 1: (One Type I or Type II, Allowable current 3.3 V: 400 mA, 5 V: 400 mA) SD Memory Card Slot*7 × 1

DDR2 SDRAM, 172-pin, 1.8 V, Micro DIMM, PC2-3200 Compliant*8

USB Ports × 2 ( USB2.0 × 2 ) *9 / Modem Port ( RJ-11 ) / LAN Port ( RJ-45 ) *6 / External Display Port: Mini Dsub 15-pin female / Microphone Jack: Miniature jack, 3.5 DIA / Headphone Jack: Miniature jack, 3.5 DIA / Mini Port Replicator connector: Dedi- cated 50-pin male

83 keys/Touch Pad/Touchscreen (stylus (included) touch capable) AC adaptor or Battery pack

Input: 100 V - 240 V AC, 50 Hz/60 Hz

Output: 16 V DC, 2.5 A

Li-ion 11.1 V, 7.65 Ah

Approx. 6 hours -12 hours*12 (Approx. 8 hours*13) (Disable Economy mode (ECO)) Approx. 5 hours (Power off)/Approx. 7 hours (Power on)

Approx. 35 W*16 / Approx. 40 W (maximum when recharging in the ON state)

Including protrusion of the hand strap

268 mm × 28.1 mm (at the front)/66.9 mm (at the rear) × 210 mm {10.6 " × 1.1 " /2.7 " × 8.3 "}

Excluding protrusion of the hand strap

268 mm × 28.1 mm (at the front)/49.1 mm (at the rear) × 210 mm {10.5 " × 1.1 " /2.0 " × 8.3 "}

Approx. 1520 g {3.4 lb.} (including the stylus)

5°C to 35°C {41°F to 95°F}

30% to 80% RH (No condensation) -20°C to 60°C {-4°F to 140°F}

30% to 90% RH (No condensation)

Microsoft® Windows® XP Professional with Service Pack 2 with Advanced Security Technologies (NTFS File system)

Microsoft® Internet Explorer 6 Service Pack 2 / DirectX 9.0 c / Microsoft® Windows® Media Player 10 / Microsoft® Windows® Movie Maker 2.1 / Microsoft® .NET Framework

1.1/ Adobe Reader / Intel® PROSet/Wireless Software / SD Utility / Icon Enlarger /

Loupe Utility / Touch Pad Utility / DMI Viewer / PC Information Viewer / Display Rotation Tool / Hotkey Settings / Wireless LAN Switch Utility / Economy Mode (ECO) Setting Util- ity / Battery Recalibration Utility / Infineon TPM Professional Package*20

Setup Utility / Hard Disk Data Erase Utility*19 / Hard Disk Backup Utility*19

10

Image 10
Contents CF-T4 Contents Page Page Page Page Page Page Page Specifications Main SpecificationsWireless LAN Names and Function of Parts EXT Basic Procedures Diagnosis & RepairTroubleshooting Page Page Page Page Page ConnectionDiagram DFJS980ZAPower-on Self Test Boot Check Diagnosis by Error Code Outline of Self Diagnostic Tests Self Diagnosis TestPage Page Page Order of test flow selection Disassembly instructions Disassembly Flow ChartPreparation Removing the KeyboardRemoving the HDD Removing the Top CaseRemoving the Touch Pad Preparation perform the .2.1. , 6.2.2. and 6.2.4. firstRemoving the USB Board Removing the LCD Knob and the SpeakerRemoving the Main Board Removing the Wireless LAN Module Removing the Antenna Board L,R and the DC-IN CableRemoving the Modem Removing the Card Bus EjectorRemoving the Hinge Cover Removing the LCD UnitRemoving the LCD Unit and the LCD Rear Remove the InverterAssembly knowhow of part LCD Reassenbly instructionsPutting of PET Tape Cable must not run aground on the damper Putting of gasket LCD Installation and Line processing of Speaker LCD cable processing 8mm LCD Cable Conductive ClothProcessing of DC-IN Cable and Coaxial Cable Assembly of Touch PadObtaining of Side Cover L Processing of Modem Cable and LAN Cable Screw tightening procedure of Each UnitProcessing of USB Cable Putting of tape ScrewB ScrewC ScrewB ScrewE ScrewH ScrewI ScrewF System Block Diagram Explanation of HarddwareDCIN&BATT Extended View Display SectionLCD Unit Assy / Pen Holder Section Cabinet Section Bottom Section Replacement Parts List Packing Material LCD Front TP DXQT2+E12FNL Screw