Panasonic CF-T4HWETZBM Processing of Modem Cable and LAN Cable, Processing of USB Cable

6.3.7.Processing of MODEM Cable and LAN Cable

Insert LAN cable previously

LAN Cable

Standard The cable

must enter in the set of 3-5mm

Give slack

to the drawing out part

USB Sheet

The cable is processed with the boss between ribs

MODEM Cable PET Tape

The state that the tension hangs is NG

The USB sheet is put and the cable is held

6.3.8.Processing of USB Cable

HDD Unit

PET Tape

Do not run aground in the boss

Process the line to 3 cables in parallel based on the difference of the concave part of the bottom case

Order is USB, modem, and LAN cable from this side

USB Board

	The Cable must not enter under the
Boss
	HDD unit
	Do not run aground in the boss

PET Tape 02mm 02mm

6.3.9.Screw tightening procedure of Each Unit

When serving, the screw tightening is executed according to the undermentioned procedure.

1.Screw tightening of top case

1-1. DXQT2+E6FNL(K:N12) is tightened. No.1 to No.3

1-2. DXQT26+D8FCL(L:N15) is tightened. No.4 ,No.5

1-3. DXHM0056ZA(J:N6) is tightened. No.6

Screw(L)

Screw(K)

Screw(J) Screw(J)

Screw(K)

Screw(K)

40