6.2.11. Removing the MODEM
Preparation : perform the section 6.2.1. , 6.2.2. , 6.2.4. and 6.2.8. first.
1.Remove the 2 screws (O). Screw (O):DXQT2+D25FNL(N8)
2.Remove the MODEM from main board connector (CN18) as vertical.
Screw (O) | Screw (O) |
Modem
CN18
6.2.12. Removing the Card Bus Ejector
Preparation : perform the section 6.2.1. , 6.2.2. , 6.2.4. and 6.2.8. first.
1.Remove the 1 screw (P) from connection side of wireless LAN.
Screw(P):DFHE5025XA(N1)
Screw(P)
Main Board
2.Turn to the card bus ejector side.
3.Remove the 2 hooks (C) from the connector (CN14).
Card Bus Ejector
Hook(C)
Main Board
CN14
33