Panasonic CF-T4HWETZBM service manual Wireless LAN

Page 11
Varies depending on the usage conditions, CPU speed, etc. Measured value when the power saving function on the USB2.0 USB Root Hub is set to on. (At the time of purchase, the power saving function is set to off. ￿
When Economy Mode (ECO) is enabled, the operating time becomes approximately 20% shorter than when it is disabled. Measured using BatteryMarkVersion 4.0.1 (LCD brightness : Maximum - Minimum).
Measured using MobileMark2002 (LCD brightness : 60 cd/m2).
Varies depending on the usage conditions, CPU speed, etc. It may take a long time to charge a fully discharged battery.
Approx. 1.5 W when the battery pack is fully charged (or not being charged) and the computer is off. Rated power consumption.
Average value. May differ depending on models.
Operations of this computer are not guaranteed except for the pre-installed OS. The Product Recovery DVD-ROM is required.
This computer is supplied with a 125 V AC compatible AC cord.
Does not guarantee operation of all USB-compatible peripherals.
<Only for North America>
The AC adaptor is compatible with power sources up to 240 V AC adaptor.
1 MB = 1,048,576 bytes
A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video Memory cannot be set by the user.
1 GB = 1,000,000,000 bytes. Operating system or some application software will report as fewer GB. A 16,777,216 color display is achieved by using the dithering function.
Display may be impossible using some connected external displays. Some devices cannot be used depending on the port type.
Operation has been confirmed for Panasonic SD memory cards with up to 2 GB capacity. The transfer rate using the SD memory card slot on this computer is 8 MB per second (this is a theoretical value, and differs from actual speeds). The transfer rate is 8 MB per second even if you use an SD memory card that supports high-speed transfer rates. Does not guarantee connection/ operation of all SD devices. Does not support MultiMedia card. Do not insert MultiMedia card.
Only a RAM module designed for DDR2 (PC2-3200) can be added (Panasonic : CF-BAV0256U /CF-BAV0512U). JEDEC standard 214 pin Micro DIMM cannot be used. PC2100 / PC2700 172 pin Micro DIMM cannot be used.

*1

*2

*3

*4

*5

*6

*7

*8

*9

*10

*11

*12

*13

*14

*15

*16

*17

*18

*19

*20 For information on TPM, input [c:\util\drivers\tpm\README.pdf] in [start] - [Run] and refer to the installation manual of “Trusted Platform Module (TPM)”. You need to install Infineon TPM Professional Package to use TPM.

Wireless LAN

 

 

IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps (automatically switched)*21

Data Transfer Rates

IEEE802.11b: 11/5.5/2/1 Mbps (automatically switched)*20

 

IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps (automatically switched)*21

Standard Supported

IEEE802.11a/IEEE802.11b/IEEE802.11g

Transmission Method

OFDM system, DS-SS system

Wireless Channels Used

IEEE802.11a: Channels 36/40/44/48/52/56/60/64/149/153/157/161/165

IEEE802.11b/ IEEE802.11g: Channels 1 to 11

RF Frequency Band

IEEE802.11a: 5.18 - 5.32 GHz, 5.745 - 5.825 GHz

IEEE802.11b/ IEEE802.11g: 2412 - 2462 MHz

 

*21 These are speeds specified in IEEE802.11a+b+g standards. Actual speeds may differ.

10-1

Image 11
Contents CF-T4 Contents Page Page Page Page Page Page Page Main Specifications SpecificationsWireless LAN Names and Function of Parts EXT Diagnosis & Repair Basic ProceduresTroubleshooting Page Page Page Page Page DFJS980ZA ConnectionDiagramPower-on Self Test Boot Check Diagnosis by Error Code Self Diagnosis Test Outline of Self Diagnostic TestsPage Page Page Order of test flow selection Disassembly Flow Chart Disassembly instructionsRemoving the Keyboard PreparationRemoving the Top Case Removing the HDDPreparation perform the .2.1. , 6.2.2. and 6.2.4. first Removing the Touch PadRemoving the Main Board Removing the LCD Knob and the SpeakerRemoving the USB Board Removing the Antenna Board L,R and the DC-IN Cable Removing the Wireless LAN ModuleRemoving the Card Bus Ejector Removing the ModemRemove the Inverter Removing the LCD UnitRemoving the LCD Unit and the LCD Rear Removing the Hinge CoverReassenbly instructions Assembly knowhow of part LCDPutting of PET Tape Cable must not run aground on the damper Putting of gasket LCD LCD cable processing 8mm LCD Cable Conductive Cloth Installation and Line processing of SpeakerObtaining of Side Cover L Assembly of Touch PadProcessing of DC-IN Cable and Coaxial Cable Processing of USB Cable Screw tightening procedure of Each UnitProcessing of Modem Cable and LAN Cable Putting of tape ScrewB ScrewC ScrewB ScrewE ScrewH ScrewI ScrewF Explanation of Harddware System Block DiagramDCIN&BATT Display Section Extended ViewLCD Unit Assy / Pen Holder Section Cabinet Section Bottom Section Replacement Parts List Packing Material LCD Front TP DXQT2+E12FNL Screw