Using the remote control unit
Using a wired remote control
When multiple main units are connected in the system, connect the units with the M3 stereo mini jack cable available in the market to simultaneously control the multiple main units with a single remote control unit through the REMOTE1 IN/OUT terminal. It is effective to use the wired remote control in the environment in which an obstacle stands in the light path or where devices are susceptible to outside light.
|
| R/PR | G/Y | B/PB |
VIDEO IN |
|
| RGB 1 IN | |
| REMOTE 1 | REMOTE 2 | ||
| IN | OUT |
|
|
Connect to the secondary projector
M3 stereo mini jack cable (available in the market)
Attention • Use
cable length exceeds 15 m, or if the shielding of the cable is inadequate, the operation may be unsatisfactory.
Installation
Projection schemes
Any of the following four projection schemes can be used depending on user’s needs or viewing conditions.
Use “OPTION2” menu (chosen from the MAIN MENU) to choose the appropriate projection scheme (see page 34).
Projection Scheme 2
|
| Table standing | Ceiling mount |
Scheme 1 | Front projection | (Default position) |
|
Projection | Rear projection |
|
|
Installation geometry
After the projector is roughly positioned, picture size and vertical picture positioning can be finely adjusted with the powered zoom lens and lens tilt mechanism.
Side view
With optional ceiling mount |
| |
bracket |
| |
|
| |
H |
|
|
L |
|
|
SH | 180 | 261 |
| ||
H |
|
|
Screen
L: Projection distance SH : Image height
SW : Image width
H : Distance from centre of lens to bottom edge of projected image.
Top view
SW | L | 314 |
157 | ||
| 87.5 |
|
Screen | 175 |
|
Attention • Do not place or use one projector on top of another projection unit.
•Leave a clearance of at least 50 cm so that the ventilation opening on the rear panel will not be blocked.
16