Panasonic PT-D5600EL, PT-DW5000EL, PT-DW5000E manual Adjusting the picture

Adjusting the picture

•For RGB signals

	PICTURE
PICTURE MODE		GRAPHIC
BRIGHT		32
CONTRAST		32
COLOR TEMP.		DEFAULT
WHITE GAIN		10
SHARPNESS		06
NR		OFF
AI		ON
SYSTEM		RGB
SELECT	ADJ		RETRN

•For DVI signals

	PICTURE
PICTURE MODE		GRAPHIC
BRIGHT		32
CONTRAST		32
COLOR TEMP.		DEFAULT
WHITE GAIN		10
SHARPNESS		06
NR		OFF
AI		ON
SELECT	ADJ		RETRN

COLOR

(For S-Video/Video/YPBPRsignals only)

: Deepens colours. : Weakens colours.

TINT

(For S-Video/Video/YPBPRsignals only) “TINT” is used to adjust human skin.

: Adjusts skin tone toward greenish colour.

•For S-Video/Video signals

	PICTURE
PICTURE MODE		STANDARD
BRIGHT		32
CONTRAST		32
COLOR		32
TINT		32
COLOR TEMP.		DEFAULT
WHITE GAIN		05
SHARPNESS		06
NR		ON
AI		ON
TV-SYSTEM		AUTO1
SELECT	ADJ		RETRN

•For YPBPR signals

	PICTURE
PICTURE MODE		STANDARD
BRIGHT		32
CONTRAST		32
COLOR		32
TINT		32
COLOR TEMP.		DEFAULT
WHITE GAIN		05
SHARPNESS		06
NR		ON
AI		ON
SYSTEM		AUTO
SELECT	ADJ		RETRN

: Adjusts skin tone toward reddish-purple.

COLOR TEMP.

The colour temperature is adjusted when the white areas of images take on a reddish or bluish hue.

DEFAULT: Standard setting

HIGH	: The white areas take on a more
	bluish-white hue.
MIDDLE	: The white areas take on a slightly
	reddish hue.
USER	: The RGB values of the white balance
	are set separately.
	Press the ENTER button, select “W-
	BAL HIGH” or “W-BAL LOW”, and
	proceed with the detailed settings.

PICTURE MODE

The picture mode can be selected from the following depending on viewing conditions and the video signal source in use:

DYNAMIC	: Picture brightness/contrast ratio is
	increased to suit brighter viewing
	environments.
GRAPHIC	: The picture becomes suitable for
	input from to the personal
	computer.

STANDARD : The picture becomes suitable for

	moving images in general.
CINEMA	: The picture becomes suitable for
	movie sources.
NATURAL	: The picture becomes suitable for
	use in a dark room.

BRIGHT

“BRIGHT” is used to adjust the black level (brightness).

: Raises the picture brightness. : Lowers the picture brightness.

CONTRAST

“CONTRAST” is used to adjust the contrast ratio.

: Raises the contrast ratio. : Lowers the contrast ratio.

: The colours of the selected

item are darkened.

: The colours of the selected

item are lightened.

WHITE GAIN

The brightness of white parts of the image can be adjusted.

: The intensity of white colour increases. : Reverts to natural image.

SHARPNESS

“SHARPNESS” is used to adjust the crispness of the image.

: Sharpens the edge of the image. : Softens the edge of the image.

NR

In this mode, the video noise is reduced. (For S-Video/Video/YPBPRsignals)

OFF : No correction

ON : Noise reduction is set to ON. (For RGB/DVI signals)

OFF : No correction

1: Low

2: Middle

3: High

28