Using Web Browser Control
Error information page
When 
is displayed on the status information screen, click it to display the error details.
OK: Normal operation
FAILED: Occurrence of trouble
Note • Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.
When [FAILED] has appeared for an item
Parameter | Description |
|
|
MAIN CPU BUS | Trouble has occurred in the microcomputer circuitry. Consult your dealer. |
FAN | Trouble has occurred in the fan or its drive circuit. Consult your dealer. |
OPTICS MODULE | The temperature inside the projector is high. It may be that the projector is |
TEMPERATURE | being used where the ambient temperature is high such as near a heating |
| appliance. |
INPUT AIR TEMPERATURE | The input air temperature is too high. It may be that the projector is being |
| used where the ambient temperature is high such as near a heating |
| appliance. |
AROUND LAMP | The temperature near the lamp has risen very high. |
TEMPERATURE | Something may be blocking the exhaust vent. |
LAMP REMAIN TIME | The lamp runtime has exceeded the prescribed cumulative time, and it is |
| now time to replace the lamp. |
LAMP STATUS | The lamp has failed to light. |
| Wait a short while for the lamp to cool off, and then turn on the power. |
SHUTTER | Trouble has occurred in the shutter circuitry. Consult your dealer. |
AIR FILTER | Too much dust accumulates on the air filter. |
| Turn off the MAIN POWER switch using the procedure on page 23 and |
| clean the air filter (refer to page 41). |
OPTICS MODULE TEMP.SENSOR | Trouble has occurred in the temperature detection sensor inside the |
| projector. Consult your dealer. |
INPUT AIR TEMP.SENSOR | Trouble has occurred in the sensor used to detect the input air temperature. |
| Consult your dealer. |
AROUND LAMP | Trouble has occurred in the temperature detection sensor around lamps. |
TEMP. SENSOR | Consult your dealer. |
BATTERY | The backup battery has been run out. Consult your dealer. |
AIRFLOW SENSOR | Trouble has occurred in the air volume sensor. Consult your dealer. |
COLOR WHEEL | Trouble has occurred in the colour wheel or the colour wheel drive circuit. |
| Consult your dealer. |
|
|
48