OPTION1 settings
|
|
|
|
|
|
|
| OPTION1 |
|
|
|
| COLOR CORRECTION |
|
|
| |||||||
| CONTRAST MODE |
|
|
|
| ||||||
| AUTO SIGNAL |
| OFF | ||||||||
| BACK COLOR |
| BLACK | ||||||||
| SUB MEMORY LIST |
|
|
|
| ||||||
| DVI EDID |
| EDID2:PC | ||||||||
| SELECT |
|
|
|
|
|
| ENTER |
|
| RETRN |
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
COLOR CORRECTION
OFF : Standard setting
USER : The six colours of red, green, blue, cyan, magenta and yellow can be adjusted and registered for each of four signal systems: Video,
YPBPR.
Press the ENTER button to make the detailed settings.
| COLOR CORRECTION |
| The current signal |
R |
| RGB | |
0 |
| system is displayed. | |
G | 0 |
|
|
B | 0 |
|
|
Cy | 0 |
|
|
Mg | 0 |
|
|
Ye | 0 |
|
|
SELECT | ADJ | RETRN |
|
CONTRAST MODE
There are two modes for adjusting to the operating environment.
NORMAL : The contrast is set to normal and the brightness to maximum.
HIGH : The contrast is set to maximum and the brightness to normal.
AUTO SIGNAL
The position where the screen is displayed can be adjusted automatically without pressing the AUTO SETUP button on the remote control each time signals are input when signals are input frequently such as when the projector is used at a conference.
ON : Auto setup is performed automatically when the video signals of the images being projected have changed.
OFF : The input auto setup function is set to OFF.
BACK COLOR
You can set the colours of the screen when no signal is input to the projector.
BLUE: Set screen colour to blue.
BLACK: Set screen colour to black.
SUB MEMORY LIST
Multiple sets of image adjustment data (PICTURE, POSITION, ADVANCED MENU adjustment values) for the same kind of signal can be registered.
SUB MEMORY LIST
1 :
2 :
3 :
4 :
5 :
6 :
7 :
8 :
SELECT STORE
RETRN
Registering in sub memory
Select the sub memory number to be registered
using the buttons. Press the ENTER button.
Note • Sub memories range from 1 to 8.
How to select sub memory
Select sub memory number (1 to 8) using the buttons. Select
use the sub memory.
Press the ENTER button.
Note • You cannot select sub memory of a different signal system.
How to erase sub memory
Select sub memory number (1 to 8) corresponding
to sub memory to be erased using buttons. Press the STD button.
When the indicator of sub memory to be erased flashes, press the ENTER button.
DVI EDID
Set EDID to match the device connected.
Mode | Matching Signal | |
EDID1 | 480p, 576p, 720/60p, 720/50p, | |
1080/60i, 1080/50i | ||
| ||
|
| |
| VGA60, SVGA60, XGA50, XGA60, | |
EDID2:PC | XGA70, XGA85, WXGA768/50, | |
| WXGA768/60, SXGA60 | |
|
|
ENGLISH
33