Panasonic PT-D5600EL, PT-DW5000EL, PT-DW5000E manual Connection, Setup precautions

Connection

Setup precautions

•Before connecting any of your video/audio equipment to the projector, carefully read the owners manual supplied with the equipment once again.

•All cable connections should be made with the entire system devices, including the projector, first turned off.

•Obtain commercial interconnecting cables for devices supplied with no accessory or optional interconnect cables.

•Video signals containing too much jitter may cause the images on the screen to randomly wobble or shake. Inserting a time base corrector (TBC) in the projector’s video line will relieve this problem.

•The projector only accepts composite-video, S-video, analogue-RGB (with TTL sync. level), and digital signal.

•Some PC models are not compatible with PT-D5600E/PT-D5600EL/PT-DW5000E/PT-DW5000EL projectors.

•The pin assignments on the S-VIDEO IN terminal are as follows:

Pin No. Signal

Ground (luminance)

Ground (colour)

Luminance signal

Colour signal

Viewed from mating side

•The pin assignments on the RGB2 input terminal are as follows:

Pin No.	Signal
	R/PR
	G/G · SYNC/Y
	B/PB
	HD/SYNC
	VD

Viewed from mating side

•The pin assignments on the DVI-D input terminal are as follows (interface with DVI-D output terminal on PC):

Viewed from mating side

Pin No.	Signal	Pin No.	Signal
	T. M. D. S data 2-
	T. M. D. S data 2+		+5 V
	T. M. D. S data 2		Ground
	shield		Hot plug sense
			T. M. D. S data 0-
			T. M. D. S data 0+
	DDC clock		T. M. D. S data 0
	DDC data		shield
	T. M. D. S data 1-
	T. M. D. S data 1+		T. M. D. S clock
	T. M. D. S data 1		shield
	shield		T. M. D. S clock+
			T. M. D. S clock-

Pin : Not used.

Pins - , and : Ground.

•The DVI-D input terminal supports single link only.

•EDID settings should be performed to suit the DVI equipment being connected. (Page 33)

•The DVI-D input terminal can be used to connect to a DVI equipment, but note that images may not appear or the projector may not work properly when connected to certain DVI equipment.

•This projector supports HDCP.

20