Panasonic PT-D7700U, PT-DW7000U manual How to use network module optional, Example of connection

Page 90

How to use network module (optional)

The network module of the projector (ET-MD75NT) is provided with a LAN interface to enable projector control from the Web browser of personal computer.

In addition, the network module also fulfills automatic E-mail transmission function. It can send mail to a predefined E-mail address when the system malfunctions or when the lamp used hours reaches the set value.

Example of connection

A LAN cable is required to use the network module.

PC

Projector

LAN cable (straight)

LAN cable (straight)

Hub

•A Web browser is required to use this function. Make sure that a Web browser is available in the system.

•Use Microsoft Windows 95/98/98SE/Me/NT4.0/2000/XP for the OS of your personal computer.

•The Web browser should be Internet Explorer 5.01 or later or Netscape Navigator/Communicator 4.75 or later.

•To use the E-mail function, communication with E-mail server must be established. Make sure that E-mail feature is available in your system.

•Use a LAN cable of straight connection and compatible to Category 5.

•The length of LAN cable must be 100 m or shorter.

Name and function of network module parts

Function switch

Use this function to return the network module setting to the factory setting.

Serial input/output terminal

A special terminal for service person.

Connect nothing here.

LAN terminal (10Base-T/100Base-TX)

Connect LAN cable here.

FUNCTION

 

 

 

ON-LINE

SERIAL

RECEIVE

TRANSMIT

Network Module

 

 

 

 

 

On-line lamp

 

 

LAN signal sending lamp

 

This lamp lights up when the system gets ready

Blinks when sending signals.

for LAN connection.

 

Unlit or blinking lamp indicates that the system is

LAN signal receiving lamp

in preparation for LAN connection.

Blinks when receiving

 

 

 

signals.

Attention

•If the LAN terminal is touched by electrostatically charged hands (or body), failure may be caused by the discharge of static electricity.

Be careful not to touch metallic part of LAN terminal or LAN cable.

90

Page 89 Page 91
Image 90
Page 89 Page 91
Contents PT-DW7000U Commercial UseDear Panasonic Customer Model number PT-D7700U / PT-DW7000UPage Contents Precautions with regard to safety Do not place liquid containers on top of the projector Insulate the battery using tape or similar before disposalUse only the Specified battery Do not insert any foreign objects into the projectorAccessories Do not look into the lens while the projector is being usedDo not use the old lamp unit Precautions on handling Examples of system expansion Remote control When the operation mode selector is set to ProjectorName and function of parts When the operation mode selector is set to Computer Front and side of the projector Rear view of the main unit Controls on rear panel Video OUT terminal Side-mounted connection terminalsVideo in terminal RGB YPBPR1 input terminal pages 26Using the remote control unit Effective range of remote control operationLoading dry cells Setting projector ID number to remote control Using the remote control as a PC mouse Using a wired remote controlOperation mode selector switch Installation geometry InstallationAdjusting the leveling feet Projection schemeProjection distance SH Effective screen height Installation 11810 ET-D75LE3 Aspect ratio Projection distance L formula Units m Connection Before starting connection· SYNC/Y SDA HD/SYNC SCL Example of connecting with Video devices Video deck TBC built-in Color monitor Control PCVideo deck TBC built-in High-vision video deck Example of connecting with personal computers Example of connecting with the signal selector Signal selectorInstallation of input module optional Installing the input moduleTypes of the input modules optional Procedure of installation Connecting signals to the input module ET-MD95RGBRGB signal input module optional Connecting the signal to the analog RGB signal input moduleConnecting the component signals SUB BNCConnecting the signal to the video signal input module Connecting the video signalsVideo signal input module optional Connecting the component signals Serial digital input module optional ET-MD95SD2 for 480p/480i/576i Auto Connecting signals to the DVI signal input module Pin No SignalDVI-D input module optional How to install the projection lens How to remove the projection lensPress the l button. on the main unit or the remote control Powering up the projectorMaking adjustment and selection Roughly adjust the focus of the lens. Refer toPowering off the projector ProjectionHow to adjust the lens Adjustment range after lens position optical shiftChoose an item and adjust it using Buttons How to adjust the lens for addressing unevenness of focusing Automatic adjustment Auto Setup Registration of new data Registration of input signal dataRenaming the registered signals Press the Menu buttonClearing the data of registered signals How to register into sub memory How to erase sub memorySub memory On-screen indications Memory no A1Restrictions Using the Freeze function Using the Shutter functionUsing the digital zoom D.ZOOM + function On-screen menus Structure of menu screensBasic operations on menu screen Menu items settingResetting to the factory default Returning to the previous screenAdjusting the picture Switching the picture modeSelect Picture with the buttons Press the Enter button Adjusting Contrast / Bright / Color / Tint Registering the picture mode settings as presettings Select Picture withSelect OK with Buttons Press the Enter button Dynamic Iris setting Select the Dynamic Iris setting with ButtonsAdjusting the color temperature Operation Adjustment RemarksSharpness / Gamma / Noise reduction Procedure of adjustmentAdjustment items Operation To display pictures complying with the sRGB standardAdjusting the position Shift adjustmentSize adjustment Adjust the clock phase with Clock phase adjustmentSelect Clock Phase with Size modesKeystone distortion correction Adjust the Keystone horizontally With the buttonsAdjust the vertical Linearity with Buttons Select Keystone with the buttons Press the Enter buttonFormat To input Betacam with YCbCr How to use Advanced MenuSignal level Select Advanced Menu with the buttons Press Enter buttonBlanking adjustment Select Blanking with the buttons Press the Enter buttonAdjusting the input resolution Total DOTS, Display DOTS, Total Lines and Display LinesAdjusting the clamp position Select Advanced Menu with the buttons Press the Enter buttonEdge blending adjustment Specify the area to be adjusted with the buttonsAdjustment marker Edge blending adjustment continuing Select Advanced Menu with the buttonsRaster position Changing the display language When 54 pictures are displayed when Sxga signals are inputWhen 43 pictures are displayed Raster position continuingHow to change the system format How to use RGB Reality mode Procedure of setting Option settingsID number setting ID number need not be set when only one projector is usedInstallation Setting FRONT-F FRONT-C REAR-C REAR-FLamp power Lamp selectSystem information Press and buttons to select RS232C SettingPosition of on-screen indications Press and buttons to select OptionAdjusting color matching These values can be adjusted from 0 to 2 AdjustmentSelect Option with the buttons Press Enter button Adjusting the color matching using a colorimeter Select Target Data with the buttons Press the Enter buttonSelect Measured Data with Buttons Press the Enter button Using the buttons, select Auto Setup Press the Enter button Video settingAutomatic adjustment Using the buttons, switch to the desired modeOutput resolution D7700U only Auto signalFan control Use the buttons to select OFF, User 1, User 2, or User Setting FUNC1 PasswordList of P in P How to change the signal for the ET-MD95VM2 optional Communication conditions Factory setting Using the serial terminalsPin assignments and signal names Examples of connectionCommand Control commandsCable specifications Connecting to a PC Computer Projector DTE specificationsSub 9-pin female Using the Remote 2 terminalPin assignments and control External appearanceDisplaying the internal test pattern RS-422 control functionsCycle of displayed internal test patterns Setting the security Setting the passwordSelect Security with the buttons Press the Enter button Set the password with the , , and buttons Changing the passwordSetting the text Changing the textHold down the Menu button for 3 or so seconds How to use CP OptionSetting the on-screen indication function Select CP Option with the buttonsSetting the system format How to use network module optional Example of connectionName and function of network module parts Initial setting of network module Items Function Description Initial setting of network module continuingAccessing from the Web browser Port NoNetwork setting TopNetwork setting Advanced control Mail setting Monitor informationSmtp Mail setting page continuing Image file control Indication Indication of monitor lampLamp Information Checkpoint Remedial measure MonitorClean the air filter Cleaning and replacement of air filterProcedure of cleaning Dismantle the air filterReplacement of lamp unit Timing of lamp unit replacementProcedure of lamp unit replacement 101Option screen, and select On the projector or the remote controlPress the Enter button to display System Information withRemote control does Symptoms CheckpointPower does not turn on No image appears onSpecifications Remote control Power source Length of power supply cord CabinetOutside dimensions Video signal input moduleCompatible RGB/YPBPR Signals AppendixOutside dimensions Trademark AcknowledgementConcernant LA Sécurité Ne pas surcharger la prise de courant Précautions concernant la sécuritéNe pas couvrir le filtre et la sortie d’air Ne pas retirer le couvercle ou le modifierNe démontez pas le bloc lampe Ne pas placer le projecteur sur des surfaces instablesNe pas placer des récipients de liquide sur le projecteur Ne pas mettre d’objets étrangers dans le projecteurNe pas placer d’objets lourds sur le projecteur ’utiliser que la pile indiquéeNutilisez pas un bloc lampe usagé Nettoyage et maintenance Précautions pour la manipulationMise au rebut Remplacement de la lampe Période de remplacement de la lampeProcédure de remplacement de la lampe La lampe est chaude si elle vient d’être utilisée115 Technical Support Panasonic Canada Inc
Top Page Image Contents