Basic Operation
Switching the projector on/off
POWER and POWER LOCK indicators
The POWER indicator informs you of the status of the power and the POWER LOCK indicator shows the status of the RELEASE button. When the TEMP indicators are flashing, the POWER and POWER LOCK indicators will light red and you cannot switch the projector on.
|
| POWER LOCK indicator | |
POWER LOCK indicator status | |||
JJ |
|
| |
Indicator status | Status | ||
|
|
| |
|
| zzNo power is supplied. | |
No illumination or flashing | zzThe RELEASE button is pressed and the POWER button is unlocked while | ||
|
| the power is on. | |
Red | Lit | The POWER button is locked. | |
Flashing | Pressing the locked POWER button. | ||
| |||
POWER indicator status | |||
JJ |
|
| |
Indicator status | Status | ||
|
| ||
No illumination or flashing | No power is supplied and the internal cooling fan is not operating. | ||
| Lit | The power is turned off (when STANDBY MODE is set to ECO). | |
Red | If the POWER button is pressed, projection starts. | ||
| |||
| Flashing | The power is turned off (when STANDBY MODE is set to NORMAL). | |
Green | Flashing | The power is on and preparing for projection. | |
Lit | The projector is projecting. | ||
| |||
| Lit | No power supply and the internal fan is cooling the lamp by internal power | |
| supply. | ||
Orange |
| ||
Flashing | The power is switched on again while cooling the lamp and recovering to the | ||
| |||
| projection mode. Recovery may take a while. | ||
|
| ||
Remarks
zzWhen the power is turned off, the internal fan is cooling the lamp by internal power supply.
zzThe power is switched on again while cooling the lamp and recovering to the projection mode. Recovery may take a while.
zzEven while the power is turned off (when STANDBY MODE is set to ECO, the POWER indicator is lit in red), power of about 0.9 W is consumed.
20 - ENGLISH