Panasonic PT-LB75VU, PT-LB90NTU, PT-LB90U, PT-LB78VU Projector Setup menuPROJECTOR Setup menu

Page 39

PROJECTOR SETUP menuPROJECTOR SETUP menu

Navigating through the MENU (Æpage 27), select

PROJECTOR SETUP from the main menu and then select the required item from the sub-menu.

zzSet the selected item with◄►buttons.

Remote control

Control panel

STATUS

You can check the using status of the projector.

JJSIGNAL

zzNAME: Name of input signal

zzFREQUENCY: Scanning frequency of input signal

JJRUNTIME

zzPROJECTOR: Display current usage time of projector

zzLAMP: Display current usage time of lamp

NO SIGNAL SHUT-OFF

If no image signal is input for the time set with the timer, the projector will enter into standby mode automatically.

Change setting Change setting

DISABLE

NO SIGNAL SHUT-OFF is disabled

15 - 60 MIN.

Timer can be set in intervals of 5

minutes

 

INITIAL START UP

You can set the starting method when the power plug is connected to wall outlet.

Change setting Change setting

LAST MEMORY

Projector starts from the last image

before the power plug was

 

disconnected

STANDBY

Projector starts in the standby

mode

 

ON

Projector starts immediately

INSTALLATION

When installing the projector, select the projection method according to the projector position. (Æpage 16)

Change setting Change setting

FRONT/

Setting on a desk/floor and

DESK

projecting from front

FRONT/

Mounting in the ceiling with a ceiling

mount bracket (sold separately) and

CEILING

projecting from front

 

REAR/DESK

Setting on a desk/floor and projecting

from rear (Translucent screen is

 

required)

 

Mounting in the ceiling with a ceiling

REAR/CEILING

mount bracket (sold separately) and

projecting from rear (Translucent

 

screen is required)

HIGH ALTITUDE MODE

If you use the projector at high elevation, the HIGH ALTITUDE MODE setting need to be ON to set the fan speed high.

Change setting Change setting

OFF

For use in normal environment

ON

For use at high altitude

Remarks

zzAt 1 400 -2 700 m (4 593 - 8 858 ft) sea level, the setting must be ON.

zzThe loudness of fan noise depends on the HIGH ALTITUDE MODE setting.

Settings

ENGLISH - 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents PT-LB90U PT-LB78VU PT-LB75VU Serial number ImportantSafetySafetyNotice NoticeEnvironment care information for users in China Important Safety NoticeDeclaration of Conformity PanasonicContents Appendix ContentsSettings MaintenancePrecautionswith regardwithtoregardsafety to safety Precautions with regard to safety Always disconnect all cables before mov- ing the projector Do not put your weight on this projectorZzDo not set up the projector outdoors Do not place the projector in extremely hot locationsCleaning and maintenance SecurityDisposal TXFQB02VKJ2 Precautions with regard to safety AccessoriesJjlanguage Jjinitial SettingRead this first Read this firstJJControl panel AboutYourYourProjectorProjectorProjector body JJTop and front viewAbout Your Projector Back and bottom viewJJTerminals About Your Projector Remote control JJTop viewFront view Setting up Setting upScreen size and throw distance Projecting from rear Using translucent screen Setting up Projection methodFront leg adjusters and throwing angle Setting on a desk/floorBefore connecting to the projector Connecting example AV equipmentConnectionsConnections Connections Connecting example Computers JJDirect power off function Power cordConnecting JJDisconnectingPower Lock indicator status Power indicator statusIndicator status Status Press the Power button Switching the projector on/off Switching on the projectorConnect the power cord. Æpage Press the Release button to unlock the Power buttonSwitching the projector on/off Switching off the projector Press the Power button againAudio Setting Positioning the image Selecting the input signalProjecting an image Projecting an imageStopping the projection temporarily Switching the input signalRemotecontrolcontrolope ationoperation Capturing an imageJJINDEX-WINDOW display Setting up the image position automaticallyResetting to the factory default settings Controlling the volume of the speakerPress the Enter button Select OK JJButton functions in digital zoom modeNavigating through the Menu JJOperating procedureJJResetting to the factory default settings Menu NavigationJjpicture ON-SCREEN MenuSub-menu Main menuSecurity Jjprojector SetupPosition Jjdisplay OptionBrightness Picture ModeColor Temperature ContrastTV-SYSTEM Still ModeDaylight View Noise ReductionShift Clock PhaseRealtime Keystone KeystoneOver Scan AspectPosition menu Frame Lock JJS43Jjthrough Language menu Language menuClosed Caption Setting DISPLAYOPTIOPTIONmenu menuON-SCREEN Display Display Option menu Auto SetupSignal Search Startup LogoWide Mode Sxga ModeOther Functions Projector Setup menuPROJECTOR Setup menu Lamp Runtime Projector Setup menuStandby Mode Lamp PowerFunction Button Audio SettingTest Pattern Initialize ALLChange Pattern Text Display PasswordPassword Change Security menuMenu Lock Menu Lock PasswordControl Device Setup Remote ControllerJjpassword Change Jjwired LANJjwireless LAN Jjinput Password JjstatusJjtemp indicator Lamp indicatorCleaning the projector Care and ReplacementCare and Replacement Before Care and ReplacementJJLamp unit Care and Replacement Replacing the Lamp unitJJNote on lamp unit replacement JJLamp unit replacement timeJJLamp replacement procedure Lamp runtime is reset to TroubleshootingTroubleshooting This projector can project the following image signals TechnicalInformatiInformation List of compatible signalsJJConnection JJPin assignments and signal namesJJCommunication settings Technical Information Serial terminalLAN terminal Cable specificationsControl commands Technical InformationSpecifications ComputerComputer Audio PT-LB90NTU SpecificationsCeiling mount bracket safeguards Dimensions Trademark acknowledgementsUnit mm Index IndexNuméro de série Avisimportantconcernantconcernantla sécurité la sécuritéAvis important concernant la sécurité AvertissementDéclaration de conformité Ne pas surcharger la prise de courant Précautions de sécuritéAvertissement Pendant un orage, ne pas toucher le projecteur ou le câbleMise EN Garde Précautions de sécuritéZzNe pas utiliser le projecteur en extérieur Précautions lors de l’installationPrécautions lors du transport Ne pas utiliser une lampe usagéeMise au rebut Précautions lors de l’utilisationSécurité Nettoyage et entretienJJL’unité de lampe Remplacementde lunitédelunitéa lampe de la lampeJJRemarque sur le remplacement de l’unité de la lampe JJFiltre à airLa durée de la lampe est redéfinie sur « 0 » Remplacement de lunité de la lampeJJProcédure de remplacement de la lampe Appuyer sur la touche Alimentation
Top Page Image Contents