Panasonic PT-P1SDE manual Dear Panasonic Customer, Preparation

Page 2

Dear Panasonic Customer:

This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product can be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required.

Model number: PT-P1SDE

Serial number:

IMPORTANT SAFETY NOTICE

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture.

Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB

(A) according to ISO 7779.

WARNING:

1)Remove the plug from the wall outlet when this unit is not in use for a prolonged period of time.

2)To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

3)Do not remove the earthing pin on the power plug. This apparatus is equipped with a three prong earthing-type power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the earthing plug.

WARNING:

BFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the building installation wiring;

BFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

WARNING:

Do not look into the lens while the projector is being used.

BStrong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage

your eyes.

B Be especially careful not to let young children look into the lens. In addition, disconnect the mains plug when you are away from the projector.

CAUTION:

To assure continued compliance, follow the attached installation instructions, which include using the shielded interface cables when connecting to a computer or peripheral device.

Preparation

2-ENGLISH

ENGLISH-3

Image 2 Contents
LCD Projector Commercial Use Model No. PT-P1SDEDo not look into the lens while the projector is being used Dear Panasonic CustomerPreparation Contents Precautions with regard to safetyDo not place the projector into water or let it become wet Do not handle the mains plug with wet handsInsert the mains plug securely into the mains socket Do not place liquid containers on top of the projectorDo not put your weight on this projector AccessoriesInsulate the battery using tape or similar before disposal Do not place any heavy objects on top of the projectorBefore use Read this page first Other Setup menuLanguage Setup menu Location and function of each part Front leg adjuster button# Connector panel page 19 $Speaker Air outlet port Air inlet portRemote control unit Projector control panelConnector panel SD operation buttonsProjector position Setting-upProjection methods Projection distancesConnections Connecting to computerConnecting to video equipment Preparation for the remote control unit Insert the battery holderTurning on the power $Press the Power button again Turning off the power#Press the Power button Direct power off functionPress the Shutter button Adjusting the volume VolumeTurning off the picture and sound momentarily Shutter Inserting and removing the SD memory card Picture SD selection screenUseful PresentationSetting a detailed playback method for the SD memory card Button functions during playbackInterval EffectAuto Play Main Menu On-screen menusMenu screens Returning a setting to the factory default Menu operation guideDetailed Setup Adjusting the picturePicture Mode DaylightviewAspect Adjusting the positionKeystone Position Other settingsAuto Signal TV-SYSTEMChanging the display language Setup Setting up the security functionAmend Password Inserted SD KEYLamp indicator Temp indicator RemedyReplacement procedure Lamp unit replacement periodCleaning Lamp unit replacement procedure Before calling for service Removing and attaching the lens cover Cleaning and maintenanceSpecifications List of compatible signals AppendixFolder directory name DCF standardGuide screen for computer connection File nameUnits mm inch DimensionsProjection dimensions calculation methods Trademark acknowledgements For business users in the European Union
Related manuals
Manual 36 pages 61.18 Kb