![](/images/new-backgrounds/1298771/29877145x1.webp)
Adjusting the picture
Press the F or G button on the remote control unit to select an item, and then press the I or H button to change the setting.
For items without any selective setting, press the ENTER button. The next screen for the item will then be displayed.
For items with bar scales, press the ENTER button or the I or H button to display the adjustment screen, and then press the I or H button to make the adjustment.
PICTURE ADJUSTMENT
PICTURE MODE STANDARD
DAYLIGHTVIEW
AUTO
DETAILED SETUP
SELECT
ADJ
RETRN
PICTURE MODE
When an
PICTURE MODE NATURAL�
[�
STANDARD
[
DYNAMIC
When a PC signal is being input
PICTURE MODE DYNAMIC�
[�
NATURAL
[
STANDARD
When an SD signal is being input
PICTURE MODE AUTO�
[�
PHOTO
[
STANDARD
[
DYNAMIC
Select the picture mode that best matches the image source and room conditions.
The mode best used in dark rooms is “NATURAL”. For rooms having regular lighting conditions in use, select “STANDARD”. For exceptionally bright rooms, use “DYNAMIC”.
“PHOTO” and “AUTO” are available only if an SD signal is being input. Set to “PHOTO” when projecting photographs. When set to “AUTO”, the picture mode will be automatically switched to the best mode.
DAYLIGHTVIEW
This adjusts the vividness of the projected images when the projector is used under bright lighting.
DAYLIGHTVIEW AUTO
[
OFF
AUTO
The vividness of the projected images will be adjusted according to the lighting condition of the room.
OFF
“DAYLIGHTVIEW” is disabled.
NOTE:
B“AUTO” may not function correctly if any objects are placed on the projector.
B“DAYLIGHTVIEW” will be disabled when “FRONT/REAR” in the “OTHER SETUP” menu is set to “REAR”.
DETAILED SETUP
You can adjust the picture quality of the projected images in detail. Press the ENTER button to display the “DETAILED SETUP” menu.
DETAILED | SETUP |
CONTRAST | 32 |
BRIGHTNESS | 32 |
COLOR ADJUSTMENT SELECT
ENTER
RETRN
CONTRAST
This adjusts the contrast of the picture. (Adjust the “BRIGHTNESS” setting first if required before adjusting the “CONTRAST” setting.) The picture is bright: I button The picture is dark: H button
BRIGHTNESS
This adjusts the darker areas (black areas) in the picture.
Black areas are too light: I button
Dark areas are too solid: H button
COLOR ADJUSTMENT
COLOR 32
TINT 32
COLOR
The colour is too pale: F button
The colour is too deep: G button
TINT
This adjusts the flesh tones in the picture.
The flesh tones are greenish:
Ibutton
The flesh tones are reddish:
Hbutton
Adjustments and settings