Cleaning and maintenance
Before carrying out cleaning and maintenance, be sure to disconnect the mains plug from the mains socket.
Wipe the cabinet with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in water with a small amount of neutral detergent in it, squeeze the cloth very well, and then wipe the cabinet. After cleaning, wipe the cabinet dry with a dry cloth. If using a
Do not wipe the lens or the lens cover with a cloth that is dusty or which produces lint.
If any dust or lint gets onto the lens or the lens cover, such dust or lint will be magnified and projected onto the screen. Use a blower to clean any dust and lint from the lens and the lens cover surface, or use a soft cloth to wipe off any dust or lint.
Removing and attaching the lens cover
Removing
BTurn the ring to the right and remove the lens cover.
Attaching
BReplace the lens cover and turn it to the left to lock it in place.
NOTE:
BThe lens cover is made of glass, so dropping it or allowing it to hit hard objects may cause it to break. Be careful when handling the lens cover
BUse the projector with the lens cover attached.
Specifications
Power supply: | 100 V - 240 V ~, 50 Hz/60 Hz | |
Power consumption: | 180 W [During standby (when fan is | |
| stopped): Approx. 3 W] | |
Amps: | 2.2 A - 1.0 A | |
|
| |
LCD panel: |
| |
Panel size (diagonal): | 0.6 type (15.24 mm) | |
Aspect ratio: | 4:3 | |
Micro lens array: | Available | |
Display method: | 3 transparent LCD panels (RGB) | |
Drive method: | Active matrix method | |
Pixels: | 480 000 (800 x 600) x 3 panels | |
|
| |
Lens: | Manual zoom (1.2 x) / Manual focus | |
| F 1.7 - 1.8 f 17.0 mm - 20.4 mm | |
|
| |
Lamp: | UHM lamp (130 W) | |
|
| |
Luminosity: | 1 500 lm | |
| ||
Scanning frequency (for RGB signals): | ||
Horizontal scanning frequency: | 15 kHz - 91 kHz | |
Vertical scanning frequency: | 50 Hz - 85 Hz | |
Dot clock frequency: | Less than 100 MHz | |
YPBPR signals: | 480i, 576i, 480p, 576p, 1 080/60i, | |
| 1 080/50i, 720/60p | |
Colour system: | 7 (NTSC/NTSC | |
| PAL60/SECAM) | |
|
| |
Projection size: | 965 mm - 7 620 mm (38˝ - 300˝) | |
|
| |
Throw distance: | 1.2 m - 9.9 m (3´11˝ - 32´5˝) | |
|
| |
Optical axis shift: | 4:1 (fixed) | |
|
| |
Screen aspect ratio: | 4:3 | |
|
| |
Installation: | Front/Rear/Ceiling/Desk (menu selection) | |
|
| |
Speaker: | 2.0 cm round x 1 | |
Max. usable volume output: | 0.5 W (mono) | |
|
| |
Connectors |
| |
PC IN: | ||
During RGB input: | 0.7 V | |
R.G.B.: | ||
G.SYNC: | 1.0 V | |
HD/SYNC: | TTL, automatic positive/negative polarity | |
| compatible | |
VD: | TTL, automatic positive/negative polarity | |
During YPBPR input: | compatible | |
1.0 V | ||
Y: | ||
PB, PR : | 0.7 V | |
Others