Panasonic PT-P1SDE manual Dimensions, Projection dimensions calculation methods, Units mm inch

Page 35

Projection dimensions calculation methods

If the screen size (diagonal) is SD (m), then the following formula is used to calculate the projection distance for the wide lens position (LW) and the projection distance for the telephoto lens position (LT).

Dimensions

<Units: mm (inch)>

 

4:3

 

SH

 

H1

LW/LT

SW

Minimum Projection Distance

LW=0.028xSD/0.0254-0.042

Maximum Projection Distance

LT=0.033xSD/0.0254-0.043

For 16:9 aspect ratios, the following formula can be used to calculate the projection distance.

Minimum Projection Distance

LW=0.031xSD/0.0254-0.042

Maximum Projection Distance

LT=0.036xSD/0.0254-0.043

*The values obtained from the formulas above are approximate.

NOTE:

BIf 4:3 images are projected onto a 16:9 screen that has been set using the projection distance for a 16:9 screen, the 4:3 images will overflow the screen at the top and bottom. In such cases, set “ASPECT” to “S4:3”. (Refer to page 47 for details.)

54.0(2-1/8˝)

234.0(9-3/16˝)

188.0(7-3/8˝)

43.3

(1-11/16˝)

71.0(2-25/32˝)

 

 

 

-7/32˝)

170.5(6-11/16˝)

 

 

6.0(

 

Others

68-ENGLISH

ENGLISH-69

Page 34 Page 36
Image 35
Page 34 Page 36
Contents
Model No. PT-P1SDE LCD Projector Commercial UseDo not look into the lens while the projector is being used Dear Panasonic CustomerPreparation Precautions with regard to safety ContentsDo not place liquid containers on top of the projector Do not handle the mains plug with wet handsInsert the mains plug securely into the mains socket Do not place the projector into water or let it become wetDo not place any heavy objects on top of the projector AccessoriesInsulate the battery using tape or similar before disposal Do not put your weight on this projectorBefore use Read this page first Other Setup menuLanguage Setup menu Air inlet port Front leg adjuster button# Connector panel page 19 $Speaker Air outlet port Location and function of each partProjector control panel Remote control unitSD operation buttons Connector panelProjection distances Setting-upProjection methods Projector positionConnections Connecting to computerConnecting to video equipment Insert the battery holder Preparation for the remote control unitTurning on the power Direct power off function Turning off the power#Press the Power button $Press the Power button againPress the Shutter button Adjusting the volume VolumeTurning off the picture and sound momentarily Shutter Inserting and removing the SD memory card Presentation SD selection screenUseful PictureButton functions during playback Setting a detailed playback method for the SD memory cardInterval EffectAuto Play Main Menu On-screen menusMenu screens Menu operation guide Returning a setting to the factory defaultDaylightview Adjusting the picturePicture Mode Detailed SetupAspect Adjusting the positionKeystone TV-SYSTEM Other settingsAuto Signal PositionChanging the display language Inserted SD KEY Setting up the security functionAmend Password SetupRemedy Lamp indicator Temp indicatorReplacement procedure Lamp unit replacement periodCleaning Lamp unit replacement procedure Before calling for service Removing and attaching the lens cover Cleaning and maintenanceSpecifications Appendix List of compatible signalsFile name DCF standardGuide screen for computer connection Folder directory nameUnits mm inch DimensionsProjection dimensions calculation methods For business users in the European Union Trademark acknowledgements
Related manuals
Manual 36 pages 61.18 Kb