Panasonic PT-L795U manual Freezing the picture, Adjusting the volume

Page 24
If “+” button is pressed ... the volume becomes louder. If “-” button is pressed ... the volume becomes quieter.
If audio equipment is connected to the AUDIO OUT terminal, the output level from this terminal will be adjusted.
While the PICTURE or POSITION screen is being displayed “STD” will appear in green in the top-right corner of the screen, and the value being adjusted will be returned to the standard value.
While the AUDIO screen is being displayed
“STD” will appear in green in the top-right corner of the screen, and only the BALANCE setting will be returned to the standard value.
While an individual adjustment screen is being displayed The adjustment level will be displayed in green and only the item displayed will be returned to the standard value.

Freezing the picture

Projection can be switched between a frozen (still) picture and a moving picture each time the FREEZE button on the remote control unit is pressed.

(Remote control unit)

NOTE:

 

 

Picture adjustments, position

 

adjustments and video impose

 

and POINT ZOOM operations

 

cannot be carried out while a still

 

picture is being displayed.

Returning adjustment values to the factory default settings (standard values)

If the STD button on the remote control unit is pressed while the PICTURE screen, POSITION screen or AUDIO screen is being displayed, or while an individual adjustment screen is being displayed, the adjustment values will be returned to their standard values at the time of shipment from the factory.

(Remote control unit)

NOTE:

The TV-SYSTEM setting in the PICTURE screen (when VIDEO/S-VIDEO signals are being input) and the VOLUME setting in the AUDIO screen will not return to the standard values when the STD button is pressed.

Adjusting the volume

The volume can be adjusted using the VOL +/- buttons on the remote control unit. (Remote control unit)

NOTE:

During volume adjustment, the output level will be displayed on the screen for approximately 3 seconds. Volume adjustment can also be carried out by selecting AUDIO from the on-screen menu screen. Refer to page 27 for further details.

If this button is pressed while some other on-screen display is on the screen, the adjustment level and the bar scale will not be displayed but the adjustment operation will still work.

23

Image 24
Contents LCD Projector Contents FeaturesDear Panasonic Customer Important Safety Notice Precautions with regard to safety Setting-upWhen using the projector If problems occur during useWhen using the projector Cleaning and maintenanceTake particular care when replacing the lamp unit Do not look into the lens while the projector is being usedPrecautions on handling Wipe the cabinet with a soft, dry clothAbout condensation Remote control unit Location and function of each partFront view Projector Top and frontBack, bottom and right view Side terminal boardBefore using the remote control unit Inserting the batteriesDo not do any of the following Operating range of the remote control unit If facing the remote control unit toward the screenIlluminating the remote control unit buttons Screen ProjectorMenu operation guide Video ImposePoint Zoom Refer to Count Down Refer toPosition AudioLanguage Refer to OptionsTurning the power on and off Turning on the powerTurning off the power Power button Main Power switchScreen characteristics reference Screen requirementsStandard setting-up positions Standard setting-up dimensionsProjection distance L Maximum Minimum Adjusting the position of the projected picture Setting the projector up horizontally Retracting the adjustable legsAdjustment procedure Adjuster button Adjustable legsAdjusting the lens Adjustment procedure for direct adjustmentSetting-up positions and changing the projection method Setting procedureFront mounting Rear mountingChanging the input signal Projector Remote control unitBasic operation Press the Video buttonRGB signals that can be input Display mode name VGA400 VGA460Signal data Svga XGA Mxga Sxga MAC16 MAC21 HdtvOperating procedure Auto NtcsNTSC4.43 PAL PAL-M PAL-N SecamAdjusting the volume Freezing the pictureSelecting the picture mode Adjusting the picture to the desired setting Adjustment Range BAL R BAL G BAL BAdjusting the sound to the desired setting Adjustment procedure for volume adjustmentCorrection procedure Correcting the picture position automaticallyAdjusting the picture position When adjusting the horizontal position H-POSIWhen adjusting the vertical position V-POSI Adjustment procedure for horizontal position adjustmentAdjusting the video size For overscanningFor underscanning About dot clock adjustment Using other useful functions Using the video impose functionEnlarging part of the input picture Disabling the Power button of the remote control unit Setting procedure To change the language to German Changing the on-screen display languageUsing the power save function Using the lens retracting functionSetting procedure System configuration example Example of connection to audio-visual equipmentAudio system Laser disc player VCRExample of connection to a computer SUB HDSUB Wireless mouse About the Macintosh adapterExample of connection OperationUsing the serial connector Pin layout and signal names for Serial connectorCommunication Settings Basic formatControl commands Cable specificationsIndicators Lamp indicator Temp indicator Indicator nameIndicator display Problem Possible causeCleaning the air filter Clean the air filter and the air filter clamps Lamp unit replacement period Replacing the lamp unitReplacement procedure Lamp unit cover Fixing screw for the lamp unit coverPage Before asking for service, check the following points Specifications RGB HD/SYNC RGB OUT Audio Video Audio in L-RTrademark Acknowledgements FCCDimensions